[PATCH 4.14 039/176] net: amd-xgbe: Reset link when the link never comes back

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>

[ Upstream commit 84fe68eb67f9499309cffd97c1ba269de125ff14 ]

Normally, auto negotiation and reconnect should be automatically done by
the hardware. But there seems to be an issue where auto negotiation has
to be restarted manually. This happens because of link training and so
even though still connected to the partner the link never "comes back".
This needs an auto-negotiation restart.

Also, a change in xgbe-mdio is needed to get ethtool to recognize the
link down and get the link change message. This change is only
required in a backplane connection mode.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@xxxxxxx>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@xxxxxxx>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
Acked-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c   | 2 +-
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 8 ++++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
index 119777986ea48..20ac6db6437b7 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -1355,7 +1355,7 @@ static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 							     &an_restart);
 	if (an_restart) {
 		xgbe_phy_config_aneg(pdata);
-		return;
+		goto adjust_link;
 	}
 
 	if (pdata->phy.link) {
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 4bb95ec6fba4a..bb6f0dcea6eab 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -2435,6 +2435,14 @@ static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 	if (reg & MDIO_STAT1_LSTATUS)
 		return 1;
 
+	if (pdata->phy.autoneg == AUTONEG_ENABLE &&
+	    phy_data->port_mode == XGBE_PORT_MODE_BACKPLANE) {
+		if (!test_bit(XGBE_LINK_INIT, &pdata->dev_state)) {
+			netif_carrier_off(pdata->netdev);
+			*an_restart = 1;
+		}
+	}
+
 	/* No link, attempt a receiver reset cycle */
 	if (phy_data->rrc_count++ > XGBE_RRC_FREQUENCY) {
 		phy_data->rrc_count = 0;
-- 
2.27.0






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux