From: Federico Pellegrin <fede@xxxxxxxxxxxx>
According to the datasheet PA7 can be set to either function A, B or
C (see table 6-2 of DS60001579D). The previous value would permit just
configuring with function C.
Signed-off-by: Federico Pellegrin <fede@xxxxxxxxxxxx>
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Cc: <stable@xxxxxxxxxxxxxxx> # 5.6+
Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@xxxxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 73b6b1f89de9..4c40ae571154 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -336,7 +336,7 @@ ethernet-phy@0 {
&pinctrl {
atmel,mux-mask = <
/* A B C */
- 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */
+ 0xFFFFFEFF 0xC0E039FF 0xEF00019D /* pioA */
0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */
0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */
0x003FFFFF 0x003F8000 0x00000000 /* pioD */
--
2.30.0
