[PATCH 5.10 37/57] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>

[ Upstream commit 2f3a0828d46166d4e7df227479ed31766ee67e4a ]

VI I2C controller has known hardware bug where immediate multiple
writes to TX_FIFO register gets stuck.

Recommended software work around is to read I2C register after
each write to TX_FIFO register to flush out the data.

This patch implements this work around for VI I2C controller.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 0727383f49402..8b113ae32dc71 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -326,6 +326,8 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
 	/* read back register to make sure that register writes completed */
 	if (reg != I2C_TX_FIFO)
 		readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+	else if (i2c_dev->is_vi)
+		readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
 }
 
 static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
@@ -339,6 +341,21 @@ static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
 	writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
 }
 
+static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data,
+			   unsigned int reg, unsigned int len)
+{
+	u32 *data32 = data;
+
+	/*
+	 * VI I2C controller has known hardware bug where writes get stuck
+	 * when immediate multiple writes happen to TX_FIFO register.
+	 * Recommended software work around is to read I2C register after
+	 * each write to TX_FIFO register to flush out the data.
+	 */
+	while (len--)
+		i2c_writel(i2c_dev, *data32++, reg);
+}
+
 static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
 		       unsigned int reg, unsigned int len)
 {
@@ -811,7 +828,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
 		i2c_dev->msg_buf_remaining = buf_remaining;
 		i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
 
-		i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+		if (i2c_dev->is_vi)
+			i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+		else
+			i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
 
 		buf += words_to_transfer * BYTES_PER_FIFO_WORD;
 	}
-- 
2.27.0






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux