From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> commit 0e634efd858e0e9331ea037e1a142e34a446e9e3 upstream. Rename intel_dp_sink_dpms() to intel_dp_set_power() so one doesn't always have to convert from the DPMS enum values to the actual DP D-states. Also when dealing with a branch device this has nothing to do with any sink, so the old name was nonsense anyway. Also adjust the debug message accordingly, and pimp it with the standard encoder id+name thing. Trivial bits done with cocci: @@ expression DP; @@ ( - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF) + intel_dp_set_power(DP, DP_SET_POWER_D3) | - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON) + intel_dp_set_power(DP, DP_SET_POWER_D0) ) Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@xxxxxxxxxxxxxxx Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_ddi.c | 6 +++--- drivers/gpu/drm/i915/display/intel_dp.c | 24 ++++++++++++------------ drivers/gpu/drm/i915/display/intel_dp.h | 2 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 4 files changed, 17 insertions(+), 17 deletions(-) --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3387,7 +3387,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_ddi_init_dp_buf_reg(encoder); if (!is_mst) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_set_power(intel_dp, DP_SET_POWER_D0); intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); /* @@ -3469,7 +3469,7 @@ static void hsw_ddi_pre_enable_dp(struct intel_ddi_init_dp_buf_reg(encoder); if (!is_mst) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_set_power(intel_dp, DP_SET_POWER_D0); intel_dp_configure_protocol_converter(intel_dp); intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); @@ -3647,7 +3647,7 @@ static void intel_ddi_post_disable_dp(st * Power down sink before disabling the port, otherwise we end * up getting interrupts from the sink on detecting link loss. */ - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + intel_dp_set_power(intel_dp, DP_SET_POWER_D3); if (INTEL_GEN(dev_priv) >= 12) { if (is_mst) { --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3496,22 +3496,22 @@ void intel_dp_sink_set_decompression_sta enable ? "enable" : "disable"); } -/* If the sink supports it, try to set the power state appropriately */ -void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) +/* If the device supports it, try to set the power state appropriately */ +void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode) { - struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + struct drm_i915_private *i915 = to_i915(encoder->base.dev); int ret, i; /* Should have a valid DPCD by this point */ if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) return; - if (mode != DRM_MODE_DPMS_ON) { + if (mode != DP_SET_POWER_D0) { if (downstream_hpd_needs_d0(intel_dp)) return; - ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, - DP_SET_POWER_D3); + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); } else { struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); @@ -3520,8 +3520,7 @@ void intel_dp_sink_dpms(struct intel_dp * time to wake up. */ for (i = 0; i < 3; i++) { - ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, - DP_SET_POWER_D0); + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); if (ret == 1) break; msleep(1); @@ -3532,8 +3531,9 @@ void intel_dp_sink_dpms(struct intel_dp } if (ret != 1) - drm_dbg_kms(&i915->drm, "failed to %s sink power state\n", - mode == DRM_MODE_DPMS_ON ? "enable" : "disable"); + drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n", + encoder->base.base.id, encoder->base.name, + mode == DP_SET_POWER_D0 ? "D0" : "D3"); } static bool cpt_dp_port_selected(struct drm_i915_private *dev_priv, @@ -3707,7 +3707,7 @@ static void intel_disable_dp(struct inte * ensure that we have vdd while we switch off the panel. */ intel_edp_panel_vdd_on(intel_dp); intel_edp_backlight_off(old_conn_state); - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + intel_dp_set_power(intel_dp, DP_SET_POWER_D3); intel_edp_panel_off(intel_dp); } @@ -3929,7 +3929,7 @@ static void intel_enable_dp(struct intel lane_mask); } - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_set_power(intel_dp, DP_SET_POWER_D0); intel_dp_configure_protocol_converter(intel_dp); intel_dp_start_link_train(intel_dp); intel_dp_stop_link_train(intel_dp); --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -50,7 +50,7 @@ int intel_dp_get_link_train_fallback_val int link_rate, u8 lane_count); int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx); -void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); +void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode); void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp); void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -488,7 +488,7 @@ static void intel_mst_pre_enable_dp(stru intel_dp->active_mst_links); if (first_mst_stream) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_set_power(intel_dp, DP_SET_POWER_D0); drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true);
