From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
commit 4d163ad79b155c71bf30366dc38f8d2502f78844 upstream.
The issue is that using SPI from a callback under the CCF lock will
deadlock, since this code uses clk_get_rate().
Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller")
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi-cadence.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -115,6 +115,7 @@ struct cdns_spi {
void __iomem *regs;
struct clk *ref_clk;
struct clk *pclk;
+ unsigned int clk_rate;
u32 speed_hz;
const u8 *txbuf;
u8 *rxbuf;
@@ -250,7 +251,7 @@ static void cdns_spi_config_clock_freq(s
u32 ctrl_reg, baud_rate_val;
unsigned long frequency;
- frequency = clk_get_rate(xspi->ref_clk);
+ frequency = xspi->clk_rate;
ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
@@ -558,8 +559,9 @@ static int cdns_spi_probe(struct platfor
master->auto_runtime_pm = true;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ xspi->clk_rate = clk_get_rate(xspi->ref_clk);
/* Set to default valid value */
- master->max_speed_hz = clk_get_rate(xspi->ref_clk) / 4;
+ master->max_speed_hz = xspi->clk_rate / 4;
xspi->speed_hz = master->max_speed_hz;
master->bits_per_word_mask = SPI_BPW_MASK(8);
