FAILED: patch "[PATCH] net/mlx5e: Modify uplink state on interface up/down" failed to apply to 5.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 7d0314b11cdd92bca8b89684c06953bf114605fc Mon Sep 17 00:00:00 2001
From: Ron Diskin <rondi@xxxxxxxxxxxx>
Date: Sun, 5 Apr 2020 13:58:40 +0300
Subject: [PATCH] net/mlx5e: Modify uplink state on interface up/down

When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.

This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.

When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".

Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin <rondi@xxxxxxxxxxxx>
Reviewed-by: Roi Dayan <roid@xxxxxxxxxxxx>
Reviewed-by: Moshe Shemesh <moshe@xxxxxxxxxxxx>
Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxxxx>

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 31f9ecae98df..07fdbea7ea13 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3069,6 +3069,25 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
 	priv->tstamp.rx_filter = HWTSTAMP_FILTER_NONE;
 }
 
+static void mlx5e_modify_admin_state(struct mlx5_core_dev *mdev,
+				     enum mlx5_port_status state)
+{
+	struct mlx5_eswitch *esw = mdev->priv.eswitch;
+	int vport_admin_state;
+
+	mlx5_set_port_admin_status(mdev, state);
+
+	if (!MLX5_ESWITCH_MANAGER(mdev) ||  mlx5_eswitch_mode(esw) == MLX5_ESWITCH_OFFLOADS)
+		return;
+
+	if (state == MLX5_PORT_UP)
+		vport_admin_state = MLX5_VPORT_ADMIN_STATE_AUTO;
+	else
+		vport_admin_state = MLX5_VPORT_ADMIN_STATE_DOWN;
+
+	mlx5_eswitch_set_vport_state(esw, MLX5_VPORT_UPLINK, vport_admin_state);
+}
+
 int mlx5e_open_locked(struct net_device *netdev)
 {
 	struct mlx5e_priv *priv = netdev_priv(netdev);
@@ -3101,7 +3120,7 @@ int mlx5e_open(struct net_device *netdev)
 	mutex_lock(&priv->state_lock);
 	err = mlx5e_open_locked(netdev);
 	if (!err)
-		mlx5_set_port_admin_status(priv->mdev, MLX5_PORT_UP);
+		mlx5e_modify_admin_state(priv->mdev, MLX5_PORT_UP);
 	mutex_unlock(&priv->state_lock);
 
 	return err;
@@ -3135,7 +3154,7 @@ int mlx5e_close(struct net_device *netdev)
 		return -ENODEV;
 
 	mutex_lock(&priv->state_lock);
-	mlx5_set_port_admin_status(priv->mdev, MLX5_PORT_DOWN);
+	mlx5e_modify_admin_state(priv->mdev, MLX5_PORT_DOWN);
 	err = mlx5e_close_locked(netdev);
 	mutex_unlock(&priv->state_lock);
 
@@ -5182,7 +5201,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv)
 
 	/* Marking the link as currently not needed by the Driver */
 	if (!netif_running(netdev))
-		mlx5_set_port_admin_status(mdev, MLX5_PORT_DOWN);
+		mlx5e_modify_admin_state(mdev, MLX5_PORT_DOWN);
 
 	mlx5e_set_netdev_mtu_boundaries(priv);
 	mlx5e_set_dev_port_mtu(priv);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index 8c294ab43f90..9519a61bd8ec 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -1081,6 +1081,8 @@ static void mlx5e_uplink_rep_enable(struct mlx5e_priv *priv)
 
 	mlx5e_rep_tc_enable(priv);
 
+	mlx5_modify_vport_admin_state(mdev, MLX5_VPORT_STATE_OP_MOD_UPLINK,
+				      0, 0, MLX5_VPORT_ADMIN_STATE_AUTO);
 	mlx5_lag_add(mdev, netdev);
 	priv->events_nb.notifier_call = uplink_rep_async_event;
 	mlx5_notifier_register(mdev, &priv->events_nb);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index d9376627584e..71d01143c455 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1826,6 +1826,8 @@ int mlx5_eswitch_set_vport_state(struct mlx5_eswitch *esw,
 				 u16 vport, int link_state)
 {
 	struct mlx5_vport *evport = mlx5_eswitch_get_vport(esw, vport);
+	int opmod = MLX5_VPORT_STATE_OP_MOD_ESW_VPORT;
+	int other_vport = 1;
 	int err = 0;
 
 	if (!ESW_ALLOWED(esw))
@@ -1833,15 +1835,17 @@ int mlx5_eswitch_set_vport_state(struct mlx5_eswitch *esw,
 	if (IS_ERR(evport))
 		return PTR_ERR(evport);
 
+	if (vport == MLX5_VPORT_UPLINK) {
+		opmod = MLX5_VPORT_STATE_OP_MOD_UPLINK;
+		other_vport = 0;
+		vport = 0;
+	}
 	mutex_lock(&esw->state_lock);
 
-	err = mlx5_modify_vport_admin_state(esw->dev,
-					    MLX5_VPORT_STATE_OP_MOD_ESW_VPORT,
-					    vport, 1, link_state);
+	err = mlx5_modify_vport_admin_state(esw->dev, opmod, vport, other_vport, link_state);
 	if (err) {
-		mlx5_core_warn(esw->dev,
-			       "Failed to set vport %d link state, err = %d",
-			       vport, err);
+		mlx5_core_warn(esw->dev, "Failed to set vport %d link state, opmod = %d, err = %d",
+			       vport, opmod, err);
 		goto unlock;
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index a5175e98c0b3..5785596f13f5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -680,6 +680,8 @@ static inline int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs) { r
 static inline void mlx5_eswitch_disable(struct mlx5_eswitch *esw, bool clear_vf) {}
 static inline bool mlx5_esw_lag_prereq(struct mlx5_core_dev *dev0, struct mlx5_core_dev *dev1) { return true; }
 static inline bool mlx5_eswitch_is_funcs_handler(struct mlx5_core_dev *dev) { return false; }
+static inline
+int mlx5_eswitch_set_vport_state(struct mlx5_eswitch *esw, u16 vport, int link_state) { return 0; }
 static inline const u32 *mlx5_esw_query_functions(struct mlx5_core_dev *dev)
 {
 	return ERR_PTR(-EOPNOTSUPP);
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 073b79eacc99..1340e02b14ef 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -4381,6 +4381,7 @@ struct mlx5_ifc_query_vport_state_out_bits {
 enum {
 	MLX5_VPORT_STATE_OP_MOD_VNIC_VPORT  = 0x0,
 	MLX5_VPORT_STATE_OP_MOD_ESW_VPORT   = 0x1,
+	MLX5_VPORT_STATE_OP_MOD_UPLINK      = 0x2,
 };
 
 struct mlx5_ifc_arm_monitor_counter_in_bits {




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux