From: Peter Geis <pgwipeout@xxxxxxxxx> [ Upstream commit f4eccc7fea203cfb35205891eced1ab51836f362 ] Current implementation defaults the hda clocks to clk_m. This causes hda to run too slow to operate correctly. Fix this by defaulting to pll_p and setting the frequency to the correct rate. This matches upstream t124 and downstream t30. Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx> Tested-by: Ion Agorria <ion@xxxxxxxxxxx> Acked-by: Sameer Pujar <spujar@xxxxxxxxxx> Acked-by: Thierry Reding <treding@xxxxxxxxxx> Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx> Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@xxxxxxxxx Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/clk/tegra/clk-tegra30.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index e0aaecd98fbff..678019f86bc7a 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -1274,6 +1274,8 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_I2S3_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 }, { TEGRA30_CLK_I2S4_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 }, { TEGRA30_CLK_VIMCLK_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 }, + { TEGRA30_CLK_HDA, TEGRA30_CLK_PLL_P, 102000000, 0 }, + { TEGRA30_CLK_HDA2CODEC_2X, TEGRA30_CLK_PLL_P, 48000000, 0 }, /* must be the last entry */ { TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 }, }; -- 2.27.0
