Re: [PATCH -fixes] drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 18 Jan 2021, Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're
> actually outputting YCbCr 4:4:4. It would appear some protocol
> converters blindy consult this bit even when the source is outputting
> RGB, resulting in a visual mess.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Link: https://patchwork.freedesktop.org/patch/msgid/20210111164111.13302-1-ville.syrjala@xxxxxxxxxxxxxxx
> Fixes: 181567aa9f0d ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters")
> Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> (cherry picked from commit 3170a21f7059c4660c469f59bf529f372a57da5f)
> ---
> Unfortunately the crtc_state plumbing to
> intel_dp_configure_protocol_converter() was part of the 
> HDMI 2.1 PCON stuff, so couldn't just cherry-pick it alone.

Thanks, pushed to fixes.

BR,
Jani.

>
>  drivers/gpu/drm/i915/display/intel_ddi.c | 2 +-
>  drivers/gpu/drm/i915/display/intel_dp.c  | 9 +++++----
>  drivers/gpu/drm/i915/display/intel_dp.h  | 3 ++-
>  3 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 92940a0c5ef8..d5ace48b1ace 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3725,7 +3725,7 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
>  	intel_ddi_init_dp_buf_reg(encoder, crtc_state);
>  	if (!is_mst)
>  		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
> -	intel_dp_configure_protocol_converter(intel_dp);
> +	intel_dp_configure_protocol_converter(intel_dp, crtc_state);
>  	intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
>  					      true);
>  	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 37f1a10fd021..09123e8625c4 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -4014,7 +4014,8 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp,
>  	intel_de_posting_read(dev_priv, intel_dp->output_reg);
>  }
>  
> -void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp)
> +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp,
> +					   const struct intel_crtc_state *crtc_state)
>  {
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	u8 tmp;
> @@ -4033,8 +4034,8 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp)
>  		drm_dbg_kms(&i915->drm, "Failed to set protocol converter HDMI mode to %s\n",
>  			    enableddisabled(intel_dp->has_hdmi_sink));
>  
> -	tmp = intel_dp->dfp.ycbcr_444_to_420 ?
> -		DP_CONVERSION_TO_YCBCR420_ENABLE : 0;
> +	tmp = crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 &&
> +		intel_dp->dfp.ycbcr_444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0;
>  
>  	if (drm_dp_dpcd_writeb(&intel_dp->aux,
>  			       DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1)
> @@ -4088,7 +4089,7 @@ static void intel_enable_dp(struct intel_atomic_state *state,
>  	}
>  
>  	intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
> -	intel_dp_configure_protocol_converter(intel_dp);
> +	intel_dp_configure_protocol_converter(intel_dp, pipe_config);
>  	intel_dp_start_link_train(intel_dp, pipe_config);
>  	intel_dp_stop_link_train(intel_dp, pipe_config);
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index b871a09b6901..05f7ddf7a795 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -51,7 +51,8 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
>  int intel_dp_retrain_link(struct intel_encoder *encoder,
>  			  struct drm_modeset_acquire_ctx *ctx);
>  void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode);
> -void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp);
> +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp,
> +					   const struct intel_crtc_state *crtc_state);
>  void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
>  					   const struct intel_crtc_state *crtc_state,
>  					   bool enable);

-- 
Jani Nikula, Intel Open Source Graphics Center



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux