Re: [RESEND PATCH] PCI: qcom: use PHY_REFCLK_USE_PAD only for ipq8064

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for the patch!

On 10/19/20 7:55 PM, Ansuel Smith wrote:
> The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064
> devices. It was tested that while apq doesn't require the padding, ipq
> SoC must use it or the kernel hangs on boot.
> 
> Fixes: de3c4bf6489 ("PCI: qcom: Add support for tx term offset for rev 2.1.0")
> Reported-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
> Signed-off-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
> Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # v4.19+

Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>

> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 3aac77a295ba..dad6e9ce66ba 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -387,7 +387,9 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
>  
>  	/* enable external reference clock */
>  	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
> -	val &= ~PHY_REFCLK_USE_PAD;
> +	/* USE_PAD is required only for ipq806x */
> +	if (!of_device_is_compatible(node, "qcom,pcie-apq8064"))
> +		val &= ~PHY_REFCLK_USE_PAD;
>  	val |= PHY_REFCLK_SSP_EN;
>  	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
>  
> 

-- 
regards,
Stan



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux