From: Mario Limonciello <mario.limonciello@xxxxxxxx>
[ Upstream commit 3c98cbf22a96c1b12f48c1b2a4680dfe5cb280f9 ]
This flag can be used by an end user to disable S0ix flows on a
buggy system or by an OEM for development purposes.
If you need this flag to be persisted across reboots, it's suggested
to use a udev rule to call adjust it until the kernel could have your
configuration in a disallow list.
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Tested-by: Yijun Shen <Yijun.shen@xxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/intel/e1000e/e1000.h | 1
drivers/net/ethernet/intel/e1000e/ethtool.c | 46 ++++++++++++++++++++++++++++
drivers/net/ethernet/intel/e1000e/netdev.c | 9 +++--
3 files changed, 52 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -436,6 +436,7 @@ s32 e1000e_get_base_timinca(struct e1000
#define FLAG2_DFLT_CRC_STRIPPING BIT(12)
#define FLAG2_CHECK_RX_HWTSTAMP BIT(13)
#define FLAG2_CHECK_SYSTIM_OVERFLOW BIT(14)
+#define FLAG2_ENABLE_S0IX_FLOWS BIT(15)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -23,6 +23,13 @@ struct e1000_stats {
int stat_offset;
};
+static const char e1000e_priv_flags_strings[][ETH_GSTRING_LEN] = {
+#define E1000E_PRIV_FLAGS_S0IX_ENABLED BIT(0)
+ "s0ix-enabled",
+};
+
+#define E1000E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(e1000e_priv_flags_strings)
+
#define E1000_STAT(str, m) { \
.stat_string = str, \
.type = E1000_STATS, \
@@ -1776,6 +1783,8 @@ static int e1000e_get_sset_count(struct
return E1000_TEST_LEN;
case ETH_SS_STATS:
return E1000_STATS_LEN;
+ case ETH_SS_PRIV_FLAGS:
+ return E1000E_PRIV_FLAGS_STR_LEN;
default:
return -EOPNOTSUPP;
}
@@ -2097,6 +2106,10 @@ static void e1000_get_strings(struct net
p += ETH_GSTRING_LEN;
}
break;
+ case ETH_SS_PRIV_FLAGS:
+ memcpy(data, e1000e_priv_flags_strings,
+ E1000E_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN);
+ break;
}
}
@@ -2305,6 +2318,37 @@ static int e1000e_get_ts_info(struct net
return 0;
}
+static u32 e1000e_get_priv_flags(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ u32 priv_flags = 0;
+
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
+ priv_flags |= E1000E_PRIV_FLAGS_S0IX_ENABLED;
+
+ return priv_flags;
+}
+
+static int e1000e_set_priv_flags(struct net_device *netdev, u32 priv_flags)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ unsigned int flags2 = adapter->flags2;
+
+ flags2 &= ~FLAG2_ENABLE_S0IX_FLOWS;
+ if (priv_flags & E1000E_PRIV_FLAGS_S0IX_ENABLED) {
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac.type < e1000_pch_cnp)
+ return -EINVAL;
+ flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
+ }
+
+ if (flags2 != adapter->flags2)
+ adapter->flags2 = flags2;
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
.get_drvinfo = e1000_get_drvinfo,
@@ -2336,6 +2380,8 @@ static const struct ethtool_ops e1000_et
.set_eee = e1000e_set_eee,
.get_link_ksettings = e1000_get_link_ksettings,
.set_link_ksettings = e1000_set_link_ksettings,
+ .get_priv_flags = e1000e_get_priv_flags,
+ .set_priv_flags = e1000e_set_priv_flags,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6923,7 +6923,6 @@ static __maybe_unused int e1000e_pm_susp
struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
struct e1000_adapter *adapter = netdev_priv(netdev);
struct pci_dev *pdev = to_pci_dev(dev);
- struct e1000_hw *hw = &adapter->hw;
int rc;
e1000e_flush_lpic(pdev);
@@ -6935,7 +6934,7 @@ static __maybe_unused int e1000e_pm_susp
e1000e_pm_thaw(dev);
} else {
/* Introduce S0ix implementation */
- if (hw->mac.type >= e1000_pch_cnp)
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
e1000e_s0ix_entry_flow(adapter);
}
@@ -6947,11 +6946,10 @@ static __maybe_unused int e1000e_pm_resu
struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
struct e1000_adapter *adapter = netdev_priv(netdev);
struct pci_dev *pdev = to_pci_dev(dev);
- struct e1000_hw *hw = &adapter->hw;
int rc;
/* Introduce S0ix implementation */
- if (hw->mac.type >= e1000_pch_cnp)
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
e1000e_s0ix_exit_flow(adapter);
rc = __e1000_resume(pdev);
@@ -7615,6 +7613,9 @@ static int e1000_probe(struct pci_dev *p
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_get_hw_control(adapter);
+ if (hw->mac.type >= e1000_pch_cnp)
+ adapter->flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
+
strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
err = register_netdev(netdev);
if (err)
