On 1/7/21 11:49 PM, Mathias Kresin wrote:
Commit 65dc2e725286 ("usb: dwc2: Update Core Reset programming flow.")
revealed that the phy isn't ready immediately after enabling it's
clocks. The dwc2_check_core_version() fails and the dwc2 usb driver
errors out.
Add a short delay to let the phy get up and running. There isn't any
documentation how much time is required, the value was chosen based on
tests.
Cc: <stable@xxxxxxxxxxxxxxx> # v5.7+
Signed-off-by: Mathias Kresin <dev@xxxxxxxxx>
Acked-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
I do not know how long you have to wait here, but this looks ok, when it
works.
Hauke
---
drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index a7d126192cf1..29d246ea24b4 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -124,8 +124,16 @@ static int ltq_rcu_usb2_phy_power_on(struct phy *phy)
reset_control_deassert(priv->phy_reset);
ret = clk_prepare_enable(priv->phy_gate_clk);
- if (ret)
+ if (ret) {
dev_err(dev, "failed to enable PHY gate\n");
+ return ret;
+ }
+
+ /*
+ * at least the xrx200 usb2 phy requires some extra time to be
+ * operational after enabling the clock
+ */
+ usleep_range(100, 200);
return ret;
}
