From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> commit 7218838109fef61cdec988ff728e902d434c9cc5 upstream. I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config instead of having them defined in SPI_DW_BT1. If the kernel doesn't have the MULTIPLEXER and MUX_MMIO configs manually enabled and the SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will always fail to be probed by the driver. Fix that and the error reported by the test robot: >> ld.lld: error: undefined symbol: devm_mux_control_get >>> referenced by spi-dw-bt1.c >>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1 config. Link: https://lore.kernel.org/lkml/202011161745.uYRlekse-lkp@xxxxxxxxx/ Link: https://lore.kernel.org/linux-spi/20201116040721.8001-1-rdunlap@xxxxxxxxxxxxx/ Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver") Reported-by: kernel test robot <lkp@xxxxxxxxx> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx> Cc: Ramil Zaripov <Ramil.Zaripov@xxxxxxxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20201127144612.4204-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/spi/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -256,6 +256,7 @@ config SPI_DW_BT1 tristate "Baikal-T1 SPI driver for DW SPI core" depends on MIPS_BAIKAL_T1 || COMPILE_TEST select MULTIPLEXER + select MUX_MMIO help Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI controllers. Two of them are pretty much normal: with IRQ, DMA, @@ -269,8 +270,6 @@ config SPI_DW_BT1 config SPI_DW_BT1_DIRMAP bool "Directly mapped Baikal-T1 Boot SPI flash support" depends on SPI_DW_BT1 - select MULTIPLEXER - select MUX_MMIO help Directly mapped SPI flash memory is an interface specific to the Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
