Re: [PATCH 2/2] net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/3/21 2:25 AM, Martin Blumenstingl wrote:
There is one GSWIP_MII_CFG register for each switch-port except the CPU
port. The register offset for the first port is 0x0, 0x02 for the
second, 0x04 for the third and so on.

Update the driver to not only restrict the GSWIP_MII_CFG registers to
ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This
means we are not overwriting the configuration for the third port (port
two since we start counting from zero) with the settings for the sixth
port (with number five) anymore.

The GSWIP_MII_PCDU(p) registers are not updated because there's really
only three (one for each of the following ports: 0, 1, 5).

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>

Acked-by: Hauke Mehrtens <hauke@xxxxxxxxxx>

---
  drivers/net/dsa/lantiq_gswip.c | 23 ++++++-----------------
  1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 5d378c8026f0..4b36d89bec06 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -92,9 +92,7 @@
  					 GSWIP_MDIO_PHY_FDUP_MASK)
/* GSWIP MII Registers */
-#define GSWIP_MII_CFG0			0x00
-#define GSWIP_MII_CFG1			0x02
-#define GSWIP_MII_CFG5			0x04
+#define GSWIP_MII_CFGp(p)		(0x2 * (p))
  #define  GSWIP_MII_CFG_EN		BIT(14)
  #define  GSWIP_MII_CFG_LDCLKDIS		BIT(12)
  #define  GSWIP_MII_CFG_MODE_MIIP	0x0
@@ -392,17 +390,9 @@ static void gswip_mii_mask(struct gswip_priv *priv, u32 clear, u32 set,
  static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 clear, u32 set,
  			       int port)
  {
-	switch (port) {
-	case 0:
-		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG0);
-		break;
-	case 1:
-		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG1);
-		break;
-	case 5:
-		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG5);
-		break;
-	}
+	/* There's no MII_CFG register for the CPU port */
+	if (!dsa_is_cpu_port(priv->ds, port))
+		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFGp(port));
  }
static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 clear, u32 set,
@@ -822,9 +812,8 @@ static int gswip_setup(struct dsa_switch *ds)
  	gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
/* Disable the xMII link */
-	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, 0);
-	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, 1);
-	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, 5);
+	for (i = 0; i < priv->hw_info->max_ports; i++)
+		gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
/* enable special tag insertion on cpu port */
  	gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux