From: Fugang Duan <fugang.duan@xxxxxxx>
[ Upstream commit 5f58591323bf3f342920179f24515935c4b5fd60 ]
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2705,9 +2705,6 @@ static int stmmac_release(struct net_dev
{
struct stmmac_priv *priv = netdev_priv(dev);
- if (priv->eee_enabled)
- del_timer_sync(&priv->eee_ctrl_timer);
-
/* Stop and disconnect the PHY */
if (dev->phydev) {
phy_stop(dev->phydev);
@@ -2727,6 +2724,11 @@ static int stmmac_release(struct net_dev
if (priv->lpi_irq > 0)
free_irq(priv->lpi_irq, dev);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA and clear the descriptors */
stmmac_stop_all_dma(priv);
@@ -4418,6 +4420,11 @@ int stmmac_suspend(struct device *dev)
stmmac_disable_all_queues(priv);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA */
stmmac_stop_all_dma(priv);
