From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
[ Upstream commit 82ca4c922b8992013a238d65cf4e60cc33e12f36 ]
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.
While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.
Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reviewed-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@xxxxxxxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -30,7 +30,6 @@
#define PRG_ETH0_RGMII_MODE BIT(0)
/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
-#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
#define PRG_ETH0_TXDLY_SHIFT 5
@@ -121,8 +120,9 @@ static int meson8b_init_clk(struct meson
init.num_parents = MUX_CLK_NUM_PARENTS;
dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
- dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
- dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
+ dwmac->m250_mux.shift = __ffs(PRG_ETH0_CLK_M250_SEL_MASK);
+ dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK >>
+ dwmac->m250_mux.shift;
dwmac->m250_mux.flags = 0;
dwmac->m250_mux.table = NULL;
dwmac->m250_mux.hw.init = &init;
