[PATCH AUTOSEL 5.10 014/217] bpf: Use separate lockdep class for each hashtab

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Song Liu <songliubraving@xxxxxx>

[ Upstream commit c50eb518e262fa06bd334e6eec172eaf5d7a5bd9 ]

If a hashtab is accessed in both NMI and non-NMI contexts, it may cause
deadlock in bucket->lock. LOCKDEP NMI warning highlighted this issue:

./test_progs -t stacktrace

[   74.828970]
[   74.828971] ================================
[   74.828972] WARNING: inconsistent lock state
[   74.828973] 5.9.0-rc8+ #275 Not tainted
[   74.828974] --------------------------------
[   74.828975] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[   74.828976] taskset/1174 [HC2[2]:SC0[0]:HE0:SE1] takes:
[   74.828977] ffffc90000ee96b0 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x271/0x5a0
[   74.828981] {INITIAL USE} state was registered at:
[   74.828982]   lock_acquire+0x137/0x510
[   74.828983]   _raw_spin_lock_irqsave+0x43/0x90
[   74.828984]   htab_map_update_elem+0x271/0x5a0
[   74.828984]   0xffffffffa0040b34
[   74.828985]   trace_call_bpf+0x159/0x310
[   74.828986]   perf_trace_run_bpf_submit+0x5f/0xd0
[   74.828987]   perf_trace_urandom_read+0x1be/0x220
[   74.828988]   urandom_read_nowarn.isra.0+0x26f/0x380
[   74.828989]   vfs_read+0xf8/0x280
[   74.828989]   ksys_read+0xc9/0x160
[   74.828990]   do_syscall_64+0x33/0x40
[   74.828991]   entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   74.828992] irq event stamp: 1766
[   74.828993] hardirqs last  enabled at (1765): [<ffffffff82800ace>] asm_exc_page_fault+0x1e/0x30
[   74.828994] hardirqs last disabled at (1766): [<ffffffff8267df87>] irqentry_enter+0x37/0x60
[   74.828995] softirqs last  enabled at (856): [<ffffffff81043e7c>] fpu__clear+0xac/0x120
[   74.828996] softirqs last disabled at (854): [<ffffffff81043df0>] fpu__clear+0x20/0x120
[   74.828997]
[   74.828998] other info that might help us debug this:
[   74.828999]  Possible unsafe locking scenario:
[   74.828999]
[   74.829000]        CPU0
[   74.829001]        ----
[   74.829001]   lock(&htab->buckets[i].raw_lock);
[   74.829003]   <Interrupt>
[   74.829004]     lock(&htab->buckets[i].raw_lock);
[   74.829006]
[   74.829006]  *** DEADLOCK ***
[   74.829007]
[   74.829008] 1 lock held by taskset/1174:
[   74.829008]  #0: ffff8883ec3fd020 (&cpuctx_lock){-...}-{2:2}, at: perf_event_task_tick+0x101/0x650
[   74.829012]
[   74.829013] stack backtrace:
[   74.829014] CPU: 0 PID: 1174 Comm: taskset Not tainted 5.9.0-rc8+ #275
[   74.829015] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   74.829016] Call Trace:
[   74.829016]  <NMI>
[   74.829017]  dump_stack+0x9a/0xd0
[   74.829018]  lock_acquire+0x461/0x510
[   74.829019]  ? lock_release+0x6b0/0x6b0
[   74.829020]  ? stack_map_get_build_id_offset+0x45e/0x800
[   74.829021]  ? htab_map_update_elem+0x271/0x5a0
[   74.829022]  ? rcu_read_lock_held_common+0x1a/0x50
[   74.829022]  ? rcu_read_lock_held+0x5f/0xb0
[   74.829023]  _raw_spin_lock_irqsave+0x43/0x90
[   74.829024]  ? htab_map_update_elem+0x271/0x5a0
[   74.829025]  htab_map_update_elem+0x271/0x5a0
[   74.829026]  bpf_prog_1fd9e30e1438d3c5_oncpu+0x9c/0xe88
[   74.829027]  bpf_overflow_handler+0x127/0x320
[   74.829028]  ? perf_event_text_poke_output+0x4d0/0x4d0
[   74.829029]  ? sched_clock_cpu+0x18/0x130
[   74.829030]  __perf_event_overflow+0xae/0x190
[   74.829030]  handle_pmi_common+0x34c/0x470
[   74.829031]  ? intel_pmu_save_and_restart+0x90/0x90
[   74.829032]  ? lock_acquire+0x3f8/0x510
[   74.829033]  ? lock_release+0x6b0/0x6b0
[   74.829034]  intel_pmu_handle_irq+0x11e/0x240
[   74.829034]  perf_event_nmi_handler+0x40/0x60
[   74.829035]  nmi_handle+0x110/0x360
[   74.829036]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829037]  default_do_nmi+0x6b/0x170
[   74.829038]  exc_nmi+0x106/0x130
[   74.829038]  end_repeat_nmi+0x16/0x55
[   74.829039] RIP: 0010:__intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829042] Code: 2f 1f 03 48 8d bb b8 0c 00 00 e8 29 09 41 00 48 ...
[   74.829043] RSP: 0000:ffff8880a604fc90 EFLAGS: 00000002
[   74.829044] RAX: 000000070000000f RBX: ffff8883ec2195a0 RCX: 000000000000038f
[   74.829045] RDX: 0000000000000007 RSI: ffffffff82e72c20 RDI: ffff8883ec21a258
[   74.829046] RBP: 000000070000000f R08: ffffffff8101b013 R09: fffffbfff0a7982d
[   74.829047] R10: ffffffff853cc167 R11: fffffbfff0a7982c R12: 0000000000000000
[   74.829049] R13: ffff8883ec3f0af0 R14: ffff8883ec3fd120 R15: ffff8883e9c92098
[   74.829049]  ? intel_pmu_lbr_enable_all+0x43/0x240
[   74.829050]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829051]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829052]  </NMI>
[   74.829053]  perf_event_task_tick+0x48d/0x650
[   74.829054]  scheduler_tick+0x129/0x210
[   74.829054]  update_process_times+0x37/0x70
[   74.829055]  tick_sched_handle.isra.0+0x35/0x90
[   74.829056]  tick_sched_timer+0x8f/0xb0
[   74.829057]  __hrtimer_run_queues+0x364/0x7d0
[   74.829058]  ? tick_sched_do_timer+0xa0/0xa0
[   74.829058]  ? enqueue_hrtimer+0x1e0/0x1e0
[   74.829059]  ? recalibrate_cpu_khz+0x10/0x10
[   74.829060]  ? ktime_get_update_offsets_now+0x1a3/0x360
[   74.829061]  hrtimer_interrupt+0x1bb/0x360
[   74.829062]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   74.829063]  __sysvec_apic_timer_interrupt+0xed/0x3d0
[   74.829064]  sysvec_apic_timer_interrupt+0x3f/0xd0
[   74.829064]  ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[   74.829065]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   74.829066] RIP: 0033:0x7fba18d579b4
[   74.829068] Code: 74 54 44 0f b6 4a 04 41 83 e1 0f 41 80 f9 ...
[   74.829069] RSP: 002b:00007ffc9ba69570 EFLAGS: 00000206
[   74.829071] RAX: 00007fba192084c0 RBX: 00007fba18c24d28 RCX: 00000000000007a4
[   74.829072] RDX: 00007fba18c30488 RSI: 0000000000000000 RDI: 000000000000037b
[   74.829073] RBP: 00007fba18ca5760 R08: 00007fba18c248fc R09: 00007fba18c94c30
[   74.829074] R10: 000000000000002f R11: 0000000000073c30 R12: 00007ffc9ba695e0
[   74.829075] R13: 00000000000003f3 R14: 00007fba18c21ac8 R15: 00000000000058d6

However, such warning should not apply across multiple hashtabs. The
system will not deadlock if one hashtab is used in NMI, while another
hashtab is used in non-NMI.

Use separate lockdep class for each hashtab, so that we don't get this
false alert.

Signed-off-by: Song Liu <songliubraving@xxxxxx>
Signed-off-by: Alexei Starovoitov <ast@xxxxxxxxxx>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-2-songliubraving@xxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 kernel/bpf/hashtab.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 1fccba6e88c4e..224e2652a7c64 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -99,6 +99,7 @@ struct bpf_htab {
 	u32 n_buckets;	/* number of hash buckets */
 	u32 elem_size;	/* size of each element in bytes */
 	u32 hashrnd;
+	struct lock_class_key lockdep_key;
 };
 
 /* each htab element is struct htab_elem + key + value */
@@ -136,12 +137,18 @@ static void htab_init_buckets(struct bpf_htab *htab)
 {
 	unsigned i;
 
+	lockdep_register_key(&htab->lockdep_key);
 	for (i = 0; i < htab->n_buckets; i++) {
 		INIT_HLIST_NULLS_HEAD(&htab->buckets[i].head, i);
-		if (htab_use_raw_lock(htab))
+		if (htab_use_raw_lock(htab)) {
 			raw_spin_lock_init(&htab->buckets[i].raw_lock);
-		else
+			lockdep_set_class(&htab->buckets[i].raw_lock,
+					  &htab->lockdep_key);
+		} else {
 			spin_lock_init(&htab->buckets[i].lock);
+			lockdep_set_class(&htab->buckets[i].lock,
+					  &htab->lockdep_key);
+		}
 	}
 }
 
@@ -1338,6 +1345,7 @@ static void htab_map_free(struct bpf_map *map)
 
 	free_percpu(htab->extra_elems);
 	bpf_map_area_free(htab->buckets);
+	lockdep_unregister_key(&htab->lockdep_key);
 	kfree(htab);
 }
 
-- 
2.27.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux