From: Jan Höppner <hoeppner@xxxxxxxxxxxxx> [ Upstream commit 9e34c8ba91697cb7441805c36d92ab3e695df6e0 ] During online processing and setting up a DASD device, the configuration data for operational paths is read and validated two times (dasd_eckd_read_conf()). The first time to provide information that are necessary for the LCU setup. A second time after the LCU setup as a device might report different configuration data then. When the configuration setup for each operational path is being validated, an initial call to dasd_eckd_clear_conf_data() is issued. This call wipes all previously available configuration data and path information for each path. However, the operational path mask is not updated during this process. As a result, the stored operational path mask might no longer correspond to the operational paths mask reported by the CIO layer, as several paths might be gone between the two dasd_eckd_read_conf() calls. This inconsistency leads to more severe issues in later path handling changes. Fix this by removing the channel paths from the operational path mask during the dasd_eckd_clear_conf_data() call. Signed-off-by: Jan Höppner <hoeppner@xxxxxxxxxxxxx> Signed-off-by: Stefan Haberland <sth@xxxxxxxxxxxxx> Reviewed-by: Stefan Haberland <sth@xxxxxxxxxxxxx> Reviewed-by: Cornelia Huck <cohuck@xxxxxxxxxx> Signed-off-by: Jens Axboe <axboe@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/s390/block/dasd_eckd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index aa651403546ff..8769b90c49a30 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -979,6 +979,7 @@ static void dasd_eckd_clear_conf_data(struct dasd_device *device) device->path[i].cssid = 0; device->path[i].ssid = 0; device->path[i].chpid = 0; + dasd_path_notoper(device, i); } } -- 2.27.0
