[PATCH 4.9 45/45] x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Masami Hiramatsu <mhiramat@xxxxxxxxxx>

commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream

Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be

  insn.prefixes.bytes[i] != 0 and i < 4

instead of using insn.prefixes.nbytes.

Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@xxxxxxxxxxxx>.

 [ bp: Massage commit message, sync with the respective header in tools/
   and drop "we". ]

Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@xxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Masami Hiramatsu <mhiramat@xxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Reviewed-by: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
[sudip: adjust context, use old insn.h]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/x86/include/asm/insn.h               |   15 +++++++++++++++
 arch/x86/kernel/uprobes.c                 |   10 ++++++----
 tools/objtool/arch/x86/include/asm/insn.h |   15 +++++++++++++++
 3 files changed, 36 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -208,6 +208,21 @@ static inline int insn_offset_immediate(
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -268,10 +268,11 @@ static volatile u32 good_2byte_insns[256
 
 static bool is_prefix_bad(struct insn *insn)
 {
+	insn_byte_t p;
 	int i;
 
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
-		switch (insn->prefixes.bytes[i]) {
+	for_each_insn_prefix(insn, i, p) {
+		switch (p) {
 		case 0x26:	/* INAT_PFX_ES   */
 		case 0x2E:	/* INAT_PFX_CS   */
 		case 0x36:	/* INAT_PFX_DS   */
@@ -711,6 +712,7 @@ static const struct uprobe_xol_ops branc
 static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 {
 	u8 opc1 = OPCODE1(insn);
+	insn_byte_t p;
 	int i;
 
 	switch (opc1) {
@@ -741,8 +743,8 @@ static int branch_setup_xol_ops(struct a
 	 * Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
 	 * No one uses these insns, reject any branch insns with such prefix.
 	 */
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
-		if (insn->prefixes.bytes[i] == 0x66)
+	for_each_insn_prefix(insn, i, p) {
+		if (p == 0x66)
 			return -ENOTSUPP;
 	}
 
--- a/tools/objtool/arch/x86/include/asm/insn.h
+++ b/tools/objtool/arch/x86/include/asm/insn.h
@@ -208,4 +208,19 @@ static inline int insn_offset_immediate(
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)        \
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #endif /* _ASM_X86_INSN_H */





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux