From: Christian Eggers <ceggers@xxxxxxx>
commit 61e6fe59ede155881a622f5901551b1cc8748f6a upstream.
If arbitration is lost, the master automatically changes to slave mode.
I2SR_IBB may or may not be reset by hardware. Raising a STOP condition
by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB.
So calling i2c_imx_bus_busy() is not required and would busy-wait until
timeout.
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # Requires trivial backporting, simple remove
# the 3rd argument from the calls to
# i2c_imx_bus_busy().
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-imx.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -567,6 +567,8 @@ static void i2c_imx_stop(struct imx_i2c_
/* Stop I2C transaction */
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (!(temp & I2CR_MSTA))
+ i2c_imx->stopped = 1;
temp &= ~(I2CR_MSTA | I2CR_MTX);
if (i2c_imx->dma)
temp &= ~I2CR_DMAEN;
@@ -732,9 +734,12 @@ static int i2c_imx_dma_read(struct imx_i
*/
dev_dbg(dev, "<%s> clear MSTA\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (!(temp & I2CR_MSTA))
+ i2c_imx->stopped = 1;
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- i2c_imx_bus_busy(i2c_imx, 0);
+ if (!i2c_imx->stopped)
+ i2c_imx_bus_busy(i2c_imx, 0);
} else {
/*
* For i2c master receiver repeat restart operation like:
@@ -857,9 +862,12 @@ static int i2c_imx_read(struct imx_i2c_s
dev_dbg(&i2c_imx->adapter.dev,
"<%s> clear MSTA\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (!(temp & I2CR_MSTA))
+ i2c_imx->stopped = 1;
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- i2c_imx_bus_busy(i2c_imx, 0);
+ if (!i2c_imx->stopped)
+ i2c_imx_bus_busy(i2c_imx, 0);
} else {
/*
* For i2c master receiver repeat restart operation like:
