From: Markus Reichl <m.reichl@xxxxxxxxxxxxx> [ Upstream commit 7327c8b98e2e14c47021eea14d1ab268086a6408 ] After patch [1] SD-card becomes mmc1 and eMMC becomes mmc2. Correct trigger of LEDs accordingly. [1] https://patchwork.kernel.org/patch/11881427 Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20201104192933.1001-1-m.reichl@xxxxxxxxxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index b85ec31cd2835..78ef0037ad4b5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -74,14 +74,14 @@ diy_led: led-1 { label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc1"; + linux,default-trigger = "mmc2"; }; yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc0"; + linux,default-trigger = "mmc1"; }; }; -- 2.27.0
