Re: [PATCH] drm/omap: sdi: fix bridge enable/disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomi,

Thank you for the patch.

On Fri, Nov 27, 2020 at 10:52:41AM +0200, Tomi Valkeinen wrote:
> When the SDI output was converted to DRM bridge, the atomic versions of
> enable and disable funcs were used. This was not intended, as that would
> require implementing other atomic funcs too. This leads to:
> 
> WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268
> 
> and display not working.
> 
> Fix this by using the legacy enable/disable funcs.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Reported-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
> Fixes: 8bef8a6d5da81b909a190822b96805a47348146f ("drm/omap: sdi: Register a drm_bridge")
> Cc: stable@xxxxxxxxxxxxxxx # v5.7+
> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/omapdrm/dss/sdi.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
> index 033fd30074b0..282e4c837cd9 100644
> --- a/drivers/gpu/drm/omapdrm/dss/sdi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
> @@ -195,8 +195,7 @@ static void sdi_bridge_mode_set(struct drm_bridge *bridge,
>  	sdi->pixelclock = adjusted_mode->clock * 1000;
>  }
>  
> -static void sdi_bridge_enable(struct drm_bridge *bridge,
> -			      struct drm_bridge_state *bridge_state)
> +static void sdi_bridge_enable(struct drm_bridge *bridge)
>  {
>  	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
>  	struct dispc_clock_info dispc_cinfo;
> @@ -259,8 +258,7 @@ static void sdi_bridge_enable(struct drm_bridge *bridge,
>  	regulator_disable(sdi->vdds_sdi_reg);
>  }
>  
> -static void sdi_bridge_disable(struct drm_bridge *bridge,
> -			       struct drm_bridge_state *bridge_state)
> +static void sdi_bridge_disable(struct drm_bridge *bridge)
>  {
>  	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
>  
> @@ -278,8 +276,8 @@ static const struct drm_bridge_funcs sdi_bridge_funcs = {
>  	.mode_valid = sdi_bridge_mode_valid,
>  	.mode_fixup = sdi_bridge_mode_fixup,
>  	.mode_set = sdi_bridge_mode_set,
> -	.atomic_enable = sdi_bridge_enable,
> -	.atomic_disable = sdi_bridge_disable,
> +	.enable = sdi_bridge_enable,
> +	.disable = sdi_bridge_disable,
>  };
>  
>  static void sdi_bridge_init(struct sdi_device *sdi)

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux