[PATCH 5.9 158/252] can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>

[ Upstream commit cd9f13c59461351d7a5fd07924264fb49b287359 ]

If the CAN controller goes into bus off, the do_set_mode() callback with
CAN_MODE_START can be used to recover the controller, which then calls
flexcan_chip_start(). If configured, this is done automatically by the
framework or manually by the user.

In flexcan_chip_start() there is an explicit call to
flexcan_transceiver_enable(), which does a regulator_enable() on the
transceiver regulator. This results in a net usage counter increase, as there
is no corresponding flexcan_transceiver_disable() in the bus off code path.
This further leads to the transceiver stuck enabled, even if the CAN interface
is shut down.

To fix this problem the
flexcan_transceiver_enable()/flexcan_transceiver_disable() are moved out of
flexcan_chip_start()/flexcan_chip_stop() into flexcan_open()/flexcan_close().

Fixes: e955cead0311 ("CAN: Add Flexcan CAN controller driver")
Link: https://lore.kernel.org/r/20201118150148.2664024-1-mkl@xxxxxxxxxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/can/flexcan.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 20a56f389c20c..4cbe8889f546f 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1229,14 +1229,10 @@ static int flexcan_chip_start(struct net_device *dev)
 		priv->write(reg_mecr, &regs->mecr);
 	}
 
-	err = flexcan_transceiver_enable(priv);
-	if (err)
-		goto out_chip_disable;
-
 	/* synchronize with the can bus */
 	err = flexcan_chip_unfreeze(priv);
 	if (err)
-		goto out_transceiver_disable;
+		goto out_chip_disable;
 
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
@@ -1254,8 +1250,6 @@ static int flexcan_chip_start(struct net_device *dev)
 
 	return 0;
 
- out_transceiver_disable:
-	flexcan_transceiver_disable(priv);
  out_chip_disable:
 	flexcan_chip_disable(priv);
 	return err;
@@ -1285,7 +1279,6 @@ static int __flexcan_chip_stop(struct net_device *dev, bool disable_on_error)
 	priv->write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
 		    &regs->ctrl);
 
-	flexcan_transceiver_disable(priv);
 	priv->can.state = CAN_STATE_STOPPED;
 
 	return 0;
@@ -1321,10 +1314,14 @@ static int flexcan_open(struct net_device *dev)
 	if (err)
 		goto out_runtime_put;
 
-	err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
+	err = flexcan_transceiver_enable(priv);
 	if (err)
 		goto out_close;
 
+	err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
+	if (err)
+		goto out_transceiver_disable;
+
 	priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
 	priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
 			 (sizeof(priv->regs->mb[1]) / priv->mb_size);
@@ -1373,6 +1370,8 @@ static int flexcan_open(struct net_device *dev)
 	can_rx_offload_del(&priv->offload);
  out_free_irq:
 	free_irq(dev->irq, dev);
+ out_transceiver_disable:
+	flexcan_transceiver_disable(priv);
  out_close:
 	close_candev(dev);
  out_runtime_put:
@@ -1391,6 +1390,7 @@ static int flexcan_close(struct net_device *dev)
 
 	can_rx_offload_del(&priv->offload);
 	free_irq(dev->irq, dev);
+	flexcan_transceiver_disable(priv);
 
 	close_candev(dev);
 	pm_runtime_put(priv->dev);
-- 
2.27.0






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux