From: Chen-Yu Tsai <wens@xxxxxxxx> [ Upstream commit b1064037e8ecf09d587b7b4966eebe0c362908e5 ] The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC") Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC") Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> Link: https://lore.kernel.org/r/20201024162515.30032-7-wens@xxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +- arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index d3b337b043a15..484b93df20cb6 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index bbc6335e56314..5c3580d712e40 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -124,7 +124,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; -- 2.27.0