From: Christoph Hellwig <hch@xxxxxx>
[ Upstream commit d4609ea8b3d3fb3423f35805843a82774cb4ef2f ]
Factor out a helper from nvme_update_ns_info that configures the
per-namespaces metadata and PI settings. Also make sure the helpers
clear the flags explicitly instead of all of ->features to allow for
potentially reusing ->features for future non-metadata flags.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Reviewed-by: Keith Busch <kbusch@xxxxxxxxxx>
Reviewed-by: Sagi Grimberg <sagi@xxxxxxxxxxx>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
Reviewed-by: Damien Le Moal <damien.lemoal@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/nvme/host/core.c | 78 ++++++++++++++++++++++++----------------
1 file changed, 47 insertions(+), 31 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 59040bab5d6fa..be0cec51f5e6d 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1946,6 +1946,50 @@ static int nvme_setup_streams_ns(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
return 0;
}
+static int nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id)
+{
+ struct nvme_ctrl *ctrl = ns->ctrl;
+
+ /*
+ * The PI implementation requires the metadata size to be equal to the
+ * t10 pi tuple size.
+ */
+ ns->ms = le16_to_cpu(id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ms);
+ if (ns->ms == sizeof(struct t10_pi_tuple))
+ ns->pi_type = id->dps & NVME_NS_DPS_PI_MASK;
+ else
+ ns->pi_type = 0;
+
+ ns->features &= ~(NVME_NS_METADATA_SUPPORTED | NVME_NS_EXT_LBAS);
+ if (!ns->ms || !(ctrl->ops->flags & NVME_F_METADATA_SUPPORTED))
+ return 0;
+ if (ctrl->ops->flags & NVME_F_FABRICS) {
+ /*
+ * The NVMe over Fabrics specification only supports metadata as
+ * part of the extended data LBA. We rely on HCA/HBA support to
+ * remap the separate metadata buffer from the block layer.
+ */
+ if (WARN_ON_ONCE(!(id->flbas & NVME_NS_FLBAS_META_EXT)))
+ return -EINVAL;
+ if (ctrl->max_integrity_segments)
+ ns->features |=
+ (NVME_NS_METADATA_SUPPORTED | NVME_NS_EXT_LBAS);
+ } else {
+ /*
+ * For PCIe controllers, we can't easily remap the separate
+ * metadata buffer from the block layer and thus require a
+ * separate metadata buffer for block layer metadata/PI support.
+ * We allow extended LBAs for the passthrough interface, though.
+ */
+ if (id->flbas & NVME_NS_FLBAS_META_EXT)
+ ns->features |= NVME_NS_EXT_LBAS;
+ else
+ ns->features |= NVME_NS_METADATA_SUPPORTED;
+ }
+
+ return 0;
+}
+
static void nvme_update_disk_info(struct gendisk *disk,
struct nvme_ns *ns, struct nvme_id_ns *id)
{
@@ -2096,37 +2140,9 @@ static int __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
return -ENODEV;
}
- ns->features = 0;
- ns->ms = le16_to_cpu(id->lbaf[lbaf].ms);
- /* the PI implementation requires metadata equal t10 pi tuple size */
- if (ns->ms == sizeof(struct t10_pi_tuple))
- ns->pi_type = id->dps & NVME_NS_DPS_PI_MASK;
- else
- ns->pi_type = 0;
-
- if (ns->ms) {
- /*
- * For PCIe only the separate metadata pointer is supported,
- * as the block layer supplies metadata in a separate bio_vec
- * chain. For Fabrics, only metadata as part of extended data
- * LBA is supported on the wire per the Fabrics specification,
- * but the HBA/HCA will do the remapping from the separate
- * metadata buffers for us.
- */
- if (id->flbas & NVME_NS_FLBAS_META_EXT) {
- ns->features |= NVME_NS_EXT_LBAS;
- if ((ctrl->ops->flags & NVME_F_FABRICS) &&
- (ctrl->ops->flags & NVME_F_METADATA_SUPPORTED) &&
- ctrl->max_integrity_segments)
- ns->features |= NVME_NS_METADATA_SUPPORTED;
- } else {
- if (WARN_ON_ONCE(ctrl->ops->flags & NVME_F_FABRICS))
- return -EINVAL;
- if (ctrl->ops->flags & NVME_F_METADATA_SUPPORTED)
- ns->features |= NVME_NS_METADATA_SUPPORTED;
- }
- }
-
+ ret = nvme_configure_metadata(ns, id);
+ if (ret)
+ return ret;
nvme_set_chunk_sectors(ns, id);
nvme_update_disk_info(disk, ns, id);
#ifdef CONFIG_NVME_MULTIPATH
--
2.27.0
