From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> [ Upstream commit 9b92f5c51e9a41352d665f6f956bd95085a56a83 ] Some gpio pin at aspeed soc is input only and the prefix name of these pin is "GPI" only. This patch fine-tune the condition of GPIO check from "GPIO" to "GPI" and it will fix the usage error of banks D and E in the AST2400/AST2500 and banks T and U in the AST2600. Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs") Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> Reviewed-by: Andrew Jeffery <andrew@xxxxxxxx> Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@xxxxxxxxxxxxxx Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/pinctrl/aspeed/pinctrl-aspeed.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c index 54933665b5f8b..93b5654ff2828 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c @@ -277,13 +277,14 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function, static bool aspeed_expr_is_gpio(const struct aspeed_sig_expr *expr) { /* - * The signal type is GPIO if the signal name has "GPIO" as a prefix. + * The signal type is GPIO if the signal name has "GPI" as a prefix. * strncmp (rather than strcmp) is used to implement the prefix * requirement. * - * expr->signal might look like "GPIOT3" in the GPIO case. + * expr->signal might look like "GPIOB1" in the GPIO case. + * expr->signal might look like "GPIT0" in the GPI case. */ - return strncmp(expr->signal, "GPIO", 4) == 0; + return strncmp(expr->signal, "GPI", 3) == 0; } static bool aspeed_gpio_in_exprs(const struct aspeed_sig_expr **exprs) -- 2.27.0