While I thought I had this correct (since it actually did reject modes like I expected during testing), Ville Syrjala from Intel pointed out that the logic here isn't correct. max_clock refers to the max data rate supported by the DP encoder. So, limiting it to the output of ds_clock (which refers to the maximum dotclock of the downstream DP device) doesn't make any sense. Additionally, since we're using the connector's bpc as the canonical BPC we should use this in mode_valid until we support dynamically setting the bpp based on bandwidth constraints. https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html For more info. So, let's rewrite this using Ville's advice. Changes made for stable backport: * 5.9 didn't use drm_dp_downstream_max_dotclock() yet, so remove that (the fix is still important regardless) v2: * Ville pointed out I mixed up the dotclock and the link rate. So fix that... * ...and also rename all the variables in this function to be more appropriately labeled so I stop mixing them up. * Reuse the bpp from the connector for now until we have dynamic bpp selection. * Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we should also have been doing from the start Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx> Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation") Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Cc: Lyude Paul <lyude@xxxxxxxxxx> Cc: Ben Skeggs <bskeggs@xxxxxxxxxx> Signed-off-by: Ben Skeggs <bskeggs@xxxxxxxxxx> --- drivers/gpu/drm/nouveau/nouveau_dp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index 40683e1244c3f..9c06d1cc43905 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -114,7 +114,8 @@ nv50_dp_mode_valid(struct drm_connector *connector, unsigned *out_clock) { const unsigned min_clock = 25000; - unsigned max_clock, clock = mode->clock; + unsigned int max_rate, mode_rate, clock = mode->clock; + const u8 bpp = connector->display_info.bpc * 3; if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace) return MODE_NO_INTERLACE; @@ -122,12 +123,13 @@ nv50_dp_mode_valid(struct drm_connector *connector, if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) clock *= 2; - max_clock = outp->dp.link_nr * outp->dp.link_bw; - clock = mode->clock * (connector->display_info.bpc * 3) / 10; + max_rate = outp->dp.link_nr * outp->dp.link_bw; + mode_rate = DIV_ROUND_UP(clock * bpp, 8); + if (mode_rate > max_rate) + return MODE_CLOCK_HIGH; + if (clock < min_clock) return MODE_CLOCK_LOW; - if (clock > max_clock) - return MODE_CLOCK_HIGH; if (out_clock) *out_clock = clock; -- 2.28.0
