From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
[ Upstream commit 2734a24e6e5d18522fbf599135c59b82ec9b2c9e ]
As reported by Serge flag IRQF_NO_THREAD causes an error if the
interrupt is actually shared and the other driver(s) don't have this
flag set. This situation can occur if a PCI(e) legacy interrupt is
used in combination with forced threading.
There's no good way to deal with this properly, therefore we have to
remove flag IRQF_NO_THREAD. For fixing the original forced threading
issue switch to napi_schedule().
Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading")
Link: https://www.spinics.net/lists/netdev/msg694960.html
Reported-by: Serge Belyshev <belyshev@xxxxxxxxxxxxxxxxx>
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Tested-by: Serge Belyshev <belyshev@xxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@xxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/realtek/r8169_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4563,7 +4563,7 @@ static irqreturn_t rtl8169_interrupt(int
}
rtl_irq_disable(tp);
- napi_schedule_irqoff(&tp->napi);
+ napi_schedule(&tp->napi);
out:
rtl_ack_events(tp, status);
@@ -4738,7 +4738,7 @@ static int rtl_open(struct net_device *d
rtl_request_firmware(tp);
retval = request_irq(pci_irq_vector(pdev, 0), rtl8169_interrupt,
- IRQF_NO_THREAD | IRQF_SHARED, dev->name, tp);
+ IRQF_SHARED, dev->name, tp);
if (retval < 0)
goto err_release_fw_2;
