According to the Armada 370 and Armada XP datasheets, the part of the
Device Bus register that configure the bus width should contain 0 for
a 8 bits bus width, and 1 for a 16 bits bus width (other values are
unsupported/reserved).
However, the current conversion done in the driver to convert from a
bus width in bits to the value expected by the register leads to
setting the register to 1 for a 8 bits bus, and 2 for a 16 bits bus.
This mistake was compensated by a mistake in the existing Device Tree
files for Armada 370/XP platforms: they were declaring a 8 bits bus
width, while the hardware in fact uses a 16 bits bus width.
This commit fixes that by adjusting the conversion logic.
This patch fixes a bug that was introduced in
3edad321b1bd2e6c8b5f38146c115c8982438f06 ('drivers: memory: Introduce
Marvell EBU Device Bus driver'), which was merged in v3.11.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/memory/mvebu-devbus.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 110c036..b59a17f 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -108,8 +108,19 @@ static int devbus_set_timing_params(struct devbus *devbus,
node->full_name);
return err;
}
- /* Convert bit width to byte width */
- r.bus_width /= 8;
+
+ /*
+ * The bus width is encoded into the register as 0 for 8 bits,
+ * and 1 for 16 bits, so we do the necessary conversion here.
+ */
+ if (r.bus_width == 8)
+ r.bus_width = 0;
+ else if (r.bus_width == 16)
+ r.bus_width = 1;
+ else {
+ dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
+ return -EINVAL;
+ }
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
&r.badr_skew);
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html