[PATCH] clk: tegra: Do not return 0 on failure

[Nicolin Chen <nicoleotsuka@xxxxxxxxx>]

Return values from read_dt_param() will be either TRUE (1) or
FALSE (0), while dfll_fetch_pwm_params() returns 0 on success
or an ERR code on failure.

So this patch fixes the bug of returning 0 on failure.

Fixes: 36541f0499fe ("clk: tegra: dfll: support PWM regulator control")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
 drivers/clk/tegra/clk-dfll.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
index cfbaa90c7adb..a5f526bb0483 100644
--- a/drivers/clk/tegra/clk-dfll.c
+++ b/drivers/clk/tegra/clk-dfll.c
@@ -1856,13 +1856,13 @@ static int dfll_fetch_pwm_params(struct tegra_dfll *td)
 			    &td->reg_init_uV);
 	if (!ret) {
 		dev_err(td->dev, "couldn't get initialized voltage\n");
-		return ret;
+		return -EINVAL;
 	}
 
 	ret = read_dt_param(td, "nvidia,pwm-period-nanoseconds", &pwm_period);
 	if (!ret) {
 		dev_err(td->dev, "couldn't get PWM period\n");
-		return ret;
+		return -EINVAL;
 	}
 	td->pwm_rate = (NSEC_PER_SEC / pwm_period) * (MAX_DFLL_VOLTAGES - 1);
 
-- 
2.17.1