This reverts commit e3a8786c10e75903f1269474e21fe8cb49c3a670. While this commit allows to use the mvneta driver as a module on some configurations, it breaks other configurations even if mvneta is used built-in. This breakage is due to the fact that on some RGMII platforms, the PCS bit has to be set, and on some other platforms, it has to be cleared. At the moment, we lack informations to know exactly the significance of this bit (the datasheet only says "enables PCS"), and so we can't produce a patch that will work on all platforms at this point. And since this change is breaking the network completely for many users, it's much better to revert it for now. We'll come back later with a proper fix that takes into account all platforms. Basically: * Armada XP GP is configured as RGMII-ID, and needs the PCS bit to be set. * Armada 370 Mirabox is configured as RGMII-ID, and needs the PCS bit to be cleared. And at the moment, we don't know how to make the distinction between those two cases. One hint is that the Armada XP GP appears in fact to be using a QSGMII connection with the PHY (Quad-SGMII), but configuring it as SGMII doesn't work, while RGMII-ID works. This needs more investigation, but in the mean time, let's unbreak the network for all those users. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> Reported-by: Arnaud Ebalard <arno@xxxxxxxxxxxx> Reported-by: Alexander Reuter <Alexander.Reuter@xxxxxxx> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=73401 Cc: stable@xxxxxxxxxxxxxxx --- drivers/net/ethernet/marvell/mvneta.c | 41 ++++++++++++++++++++++++++++------- 1 file changed, 33 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 8d76fca..ca2dfbe 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -89,9 +89,8 @@ #define MVNETA_TX_IN_PRGRS BIT(1) #define MVNETA_TX_FIFO_EMPTY BIT(8) #define MVNETA_RX_MIN_FRAME_SIZE 0x247c -#define MVNETA_SERDES_CFG 0x24A0 +#define MVNETA_SGMII_SERDES_CFG 0x24A0 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 -#define MVNETA_RGMII_SERDES_PROTO 0x0667 #define MVNETA_TYPE_PRIO 0x24bc #define MVNETA_FORCE_UNI BIT(21) #define MVNETA_TXQ_CMD_1 0x24e4 @@ -712,6 +711,35 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp, mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val); } + + +/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */ +static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable) +{ + u32 val; + + val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); + + if (enable) + val |= MVNETA_GMAC2_PORT_RGMII; + else + val &= ~MVNETA_GMAC2_PORT_RGMII; + + mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); +} + +/* Config SGMII port */ +static void mvneta_port_sgmii_config(struct mvneta_port *pp) +{ + u32 val; + + val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); + val |= MVNETA_GMAC2_PCS_ENABLE; + mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); + + mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); +} + /* Start the Ethernet port RX and TX activity */ static void mvneta_port_up(struct mvneta_port *pp) { @@ -2729,15 +2757,12 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); if (phy_mode == PHY_INTERFACE_MODE_SGMII) - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); - else - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO); + mvneta_port_sgmii_config(pp); - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - - val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + mvneta_gmac_rgmii_set(pp, 1); /* Cancel Port Reset */ + val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); val &= ~MVNETA_GMAC2_PORT_RESET; mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html