From: Jamie Iles <jamie@xxxxxxxxxxxx>
[ Upstream commit 1ec8e74855588cecb2620b28b877c08f45765374 ]
MDIO reads can happen during PHY probing, and printing an error with
dev_err can result in a large number of error messages during device
probe. On a platform with a serial console this can result in
excessively long boot times in a way that looks like an infinite loop
when multiple busses are present. Since 0f183fd151c (net/fsl: enable
extended scanning in xgmac_mdio) we perform more scanning so there are
potentially more failures.
Reduce the logging level to dev_dbg which is consistent with the
Freescale enetc driver.
Cc: Jeremy Linton <jeremy.linton@xxxxxxx>
Signed-off-by: Jamie Iles <jamie@xxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/freescale/xgmac_mdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index c82c85ef5fb34..61cb4ba0005bd 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -229,7 +229,7 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
/* Return all Fs if nothing was there */
if ((xgmac_read32(®s->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
!priv->has_a011043) {
- dev_err(&bus->dev,
+ dev_dbg(&bus->dev,
"Error while reading PHY%d reg at %d.%hhu\n",
phy_id, dev_addr, regnum);
return 0xffff;
--
2.25.1
