This is a note to let you know that I've just added the patch titled
USB: cypress_m8: fix use-after-free in TIOCMIWAIT
to the 3.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-cypress_m8-fix-use-after-free-in-tiocmiwait.patch
and it can be found in the queue-3.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 2d5a267e36781e0d81e4546d2e4ffc9f63474fdf Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@xxxxxxxxx>
Date: Tue, 19 Mar 2013 09:21:13 +0100
Subject: USB: cypress_m8: fix use-after-free in TIOCMIWAIT
From: Johan Hovold <jhovold@xxxxxxxxx>
commit 356050d8b1e526db093e9d2c78daf49d6bf418e3 upstream.
Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.
This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.
Also remove bogus test for private data pointer being NULL as it is
never assigned in the loop.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
Cc: Yang Yingliang <yangyingliang@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/cypress_m8.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -125,7 +125,6 @@ struct cypress_private {
int baud_rate; /* stores current baud rate in
integer form */
int isthrottled; /* if throttled, discard reads */
- wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the argument sent to
cypress_set_termios old_termios */
@@ -475,7 +474,6 @@ static int generic_startup(struct usb_se
kfree(priv);
return -ENOMEM;
}
- init_waitqueue_head(&priv->delta_msr_wait);
/* Skip reset for FRWD device. It is a workaound:
device hangs if it receives SET_CONFIGURE in Configured
@@ -919,12 +917,16 @@ static int cypress_ioctl(struct tty_stru
switch (cmd) {
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
- while (priv != NULL) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ for (;;) {
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
- else {
+
+ if (port->serial->disconnected)
+ return -EIO;
+
+ {
char diff = priv->diff_status;
if (diff == 0)
return -EIO; /* no change => error */
@@ -1250,7 +1252,7 @@ static void cypress_read_int_callback(st
if (priv->current_status != priv->prev_status) {
priv->diff_status |= priv->current_status ^
priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
priv->prev_status = priv->current_status;
}
spin_unlock_irqrestore(&priv->lock, flags);
Patches currently in stable-queue which might be from jhovold@xxxxxxxxx are
queue-3.4/usb-oti6858-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-io_ti-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-ch341-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-io_edgeport-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-ftdi_sio-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-ark3116-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-pl2303-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-cypress_m8-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-ssu100-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-mct_u232-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-spcp8x5-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-ti_usb_3410_5052-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-mos7840-fix-broken-tiocmiwait.patch
queue-3.4/usb-serial-fix-hang-when-opening-port.patch
queue-3.4/usb-mos7840-fix-use-after-free-in-tiocmiwait.patch
queue-3.4/usb-serial-add-modem-status-change-wait-queue.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html