[PATCH] serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>

Issuing a magic-sysrq via the PL011 causes the following lockdep splat,
which is easily reproducible under QEMU:

  | sysrq: Changing Loglevel
  | sysrq: Loglevel set to 9
  |
  | ======================================================
  | WARNING: possible circular locking dependency detected
  | 5.9.0-rc7 #1 Not tainted
  | ------------------------------------------------------
  | systemd-journal/138 is trying to acquire lock:
  | ffffab133ad950c0 (console_owner){-.-.}-{0:0}, at: console_lock_spinning_enable+0x34/0x70
  |
  | but task is already holding lock:
  | ffff0001fd47b098 (&port_lock_key){-.-.}-{2:2}, at: pl011_int+0x40/0x488
  |
  | which lock already depends on the new lock.

  [...]

  |  Possible unsafe locking scenario:
  |
  |        CPU0                    CPU1
  |        ----                    ----
  |   lock(&port_lock_key);
  |                                lock(console_owner);
  |                                lock(&port_lock_key);
  |   lock(console_owner);
  |
  |  *** DEADLOCK ***

The issue being that CPU0 takes 'port_lock' on the irq path in pl011_int()
before taking 'console_owner' on the printk() path, whereas CPU1 takes
the two locks in the opposite order on the printk() path due to setting
the "console_owner" prior to calling into into the actual console driver.

Fix this in the same way as the msm-serial driver by dropping 'port_lock'
before handling the sysrq.

Cc: <stable@xxxxxxxxxxxxxxx> # 4.19+
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jirislaby@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20200811101313.GA6970@willie-the-truck
Signed-off-by: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Tested-by: Will Deacon <will@xxxxxxxxxx>
Signed-off-by: Will Deacon <will@xxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 67498594d7d7..87dc3fc15694 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -308,8 +308,9 @@ static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
  */
 static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 {
-	u16 status;
 	unsigned int ch, flag, fifotaken;
+	int sysrq;
+	u16 status;
 
 	for (fifotaken = 0; fifotaken != 256; fifotaken++) {
 		status = pl011_read(uap, REG_FR);
@@ -344,10 +345,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 				flag = TTY_FRAME;
 		}
 
-		if (uart_handle_sysrq_char(&uap->port, ch & 255))
-			continue;
+		spin_unlock(&uap->port.lock);
+		sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
+		spin_lock(&uap->port.lock);
 
-		uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
+		if (!sysrq)
+			uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
 	}
 
 	return fifotaken;
-- 
2.28.0.709.gb0816b6eb0-goog




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux