[PATCH 5.4 035/388] ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Usha Ketineni <usha.k.ketineni@xxxxxxxxx>

[ Upstream commit c0a3665f71a2f086800abea4d9d14d28269089d6 ]

This patch fixes the call trace caused by the kernel when the Rx/Tx
descriptor size change request is initiated via ethtool when DCB is
configured. ice_set_ringparam() should use vsi->num_txq instead of
vsi->alloc_txq as it represents the queues that are enabled in the
driver when DCB is enabled/disabled. Otherwise, queue index being
used can go out of range.

For example, when vsi->alloc_txq has 104 queues and with 3 TCS enabled
via DCB, each TC gets 34 queues, vsi->num_txq will be 102 and only 102
queues will be enabled.

Signed-off-by: Usha Ketineni <usha.k.ketineni@xxxxxxxxx>
Tested-by: Andrew Bowers <andrewx.bowers@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 62673e27af0e8..fc9ff985a62bd 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2635,14 +2635,14 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
 	netdev_info(netdev, "Changing Tx descriptor count from %d to %d\n",
 		    vsi->tx_rings[0]->count, new_tx_cnt);
 
-	tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_txq,
+	tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_txq,
 				sizeof(*tx_rings), GFP_KERNEL);
 	if (!tx_rings) {
 		err = -ENOMEM;
 		goto done;
 	}
 
-	for (i = 0; i < vsi->alloc_txq; i++) {
+	ice_for_each_txq(vsi, i) {
 		/* clone ring and setup updated count */
 		tx_rings[i] = *vsi->tx_rings[i];
 		tx_rings[i].count = new_tx_cnt;
@@ -2667,14 +2667,14 @@ process_rx:
 	netdev_info(netdev, "Changing Rx descriptor count from %d to %d\n",
 		    vsi->rx_rings[0]->count, new_rx_cnt);
 
-	rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_rxq,
+	rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_rxq,
 				sizeof(*rx_rings), GFP_KERNEL);
 	if (!rx_rings) {
 		err = -ENOMEM;
 		goto done;
 	}
 
-	for (i = 0; i < vsi->alloc_rxq; i++) {
+	ice_for_each_rxq(vsi, i) {
 		/* clone ring and setup updated count */
 		rx_rings[i] = *vsi->rx_rings[i];
 		rx_rings[i].count = new_rx_cnt;
@@ -2712,7 +2712,7 @@ process_link:
 		ice_down(vsi);
 
 		if (tx_rings) {
-			for (i = 0; i < vsi->alloc_txq; i++) {
+			ice_for_each_txq(vsi, i) {
 				ice_free_tx_ring(vsi->tx_rings[i]);
 				*vsi->tx_rings[i] = tx_rings[i];
 			}
@@ -2720,7 +2720,7 @@ process_link:
 		}
 
 		if (rx_rings) {
-			for (i = 0; i < vsi->alloc_rxq; i++) {
+			ice_for_each_rxq(vsi, i) {
 				ice_free_rx_ring(vsi->rx_rings[i]);
 				/* copy the real tail offset */
 				rx_rings[i].tail = vsi->rx_rings[i]->tail;
@@ -2744,7 +2744,7 @@ process_link:
 free_tx:
 	/* error cleanup if the Rx allocations failed after getting Tx */
 	if (tx_rings) {
-		for (i = 0; i < vsi->alloc_txq; i++)
+		ice_for_each_txq(vsi, i)
 			ice_free_tx_ring(&tx_rings[i]);
 		devm_kfree(&pf->pdev->dev, tx_rings);
 	}
-- 
2.25.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux