[PATCH 4.4 15/62] dmaengine: pl330: Fix burst length if burst size is smaller than bus width

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>

[ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ]

Move the burst len fixup after setting the generic value for it. This
finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine:
pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was
overwritten by the generic value.

Reported-by: kernel test robot <lkp@xxxxxxxxx>
Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width")
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@xxxxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/dma/pl330.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 799c182c3eacc..9aa57b37381a9 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2629,6 +2629,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	while (burst != (1 << desc->rqcfg.brst_size))
 		desc->rqcfg.brst_size++;
 
+	desc->rqcfg.brst_len = get_burst_len(desc, len);
 	/*
 	 * If burst size is smaller than bus width then make sure we only
 	 * transfer one at a time to avoid a burst stradling an MFIFO entry.
@@ -2636,7 +2637,6 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
 		desc->rqcfg.brst_len = 1;
 
-	desc->rqcfg.brst_len = get_burst_len(desc, len);
 	desc->bytes_requested = len;
 
 	desc->txd.flags = flags;
-- 
2.25.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux