From: František Kučera <franta-linux@xxxxxxxxxxx> commit 14335d8b9e1a2bf006f9d969a103f9731cabb210 upstream. This patch extends support for DJM-250MK2 and allows recording. However, DVS is not possible yet (see the comment in code). Signed-off-by: František Kučera <franta-linux@xxxxxxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@xxxxxxxxxxx Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- sound/usb/pcm.c | 1 sound/usb/quirks-table.h | 60 +++++++++++++++++++++++++++++++++++++++++------ sound/usb/quirks.c | 1 3 files changed, 55 insertions(+), 7 deletions(-) --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -374,6 +374,7 @@ static int set_sync_ep_implicit_fb_quirk ifnum = 2; goto add_sync_ep_from_ifnum; case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ + case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ ep = 0x82; ifnum = 0; goto add_sync_ep_from_ifnum; --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3532,14 +3532,40 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge { /* * Pioneer DJ DJM-250MK2 - * PCM is 8 channels out @ 48 fixed (endpoints 0x01). - * The output from computer to the mixer is usable. + * PCM is 8 channels out @ 48 fixed (endpoint 0x01) + * and 8 channels in @ 48 fixed (endpoint 0x82). * - * The input (phono or line to computer) is not working. - * It should be at endpoint 0x82 and probably also 8 channels, - * but it seems that it works only with Pioneer proprietary software. - * Even on officially supported OS, the Audacity was unable to record - * and Mixxx to recognize the control vinyls. + * Both playback and recording is working, even simultaneously. + * + * Playback channels could be mapped to: + * - CH1 + * - CH2 + * - AUX + * + * Recording channels could be mapped to: + * - Post CH1 Fader + * - Post CH2 Fader + * - Cross Fader A + * - Cross Fader B + * - MIC + * - AUX + * - REC OUT + * + * There is remaining problem with recording directly from PHONO/LINE. + * If we map a channel to: + * - CH1 Control Tone PHONO + * - CH1 Control Tone LINE + * - CH2 Control Tone PHONO + * - CH2 Control Tone LINE + * it is silent. + * There is no signal even on other operating systems with official drivers. + * The signal appears only when a supported application is started. + * This needs to be investigated yet... + * (there is quite a lot communication on the USB in both directions) + * + * In current version this mixer could be used for playback + * and for recording from vinyls (through Post CH* Fader) + * but not for DVS (Digital Vinyl Systems) like in Mixxx. */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { @@ -3561,6 +3587,26 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // inputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, .nr_rates = 1, .rate_table = (unsigned int[]) { 48000 } } --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1493,6 +1493,7 @@ void snd_usb_set_format_quirk(struct snd set_format_emu_quirk(subs, fmt); break; case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ + case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ pioneer_djm_set_format_quirk(subs); break; case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */