From: Oded Gabbay <oded.gabbay@xxxxxxxxx>
[ Upstream commit 58361aae4b0eed388680a89ac153d27177f40510 ]
In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.
The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: Oded Gabbay <oded.gabbay@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/misc/habanalabs/device.c | 7 ++++++-
drivers/misc/habanalabs/gaudi/gaudi.c | 11 ++++++++++-
drivers/misc/habanalabs/gaudi/gaudiP.h | 3 ++-
drivers/misc/habanalabs/habanalabs.h | 5 ++++-
drivers/misc/habanalabs/sysfs.c | 7 ++++---
5 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index 59608d1bac880..baa4e66d4c457 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -1027,7 +1027,7 @@ again:
goto out_err;
}
- hl_set_max_power(hdev, hdev->max_power);
+ hl_set_max_power(hdev);
} else {
rc = hdev->asic_funcs->soft_reset_late_init(hdev);
if (rc) {
@@ -1268,6 +1268,11 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
goto out_disabled;
}
+ /* Need to call this again because the max power might change,
+ * depending on card type for certain ASICs
+ */
+ hl_set_max_power(hdev);
+
/*
* hl_hwmon_init() must be called after device_late_init(), because only
* there we get the information from the device about which
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 8b6cf722ddf8e..ca183733847b6 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -447,7 +447,7 @@ static int gaudi_get_fixed_properties(struct hl_device *hdev)
prop->num_of_events = GAUDI_EVENT_SIZE;
prop->tpc_enabled_mask = TPC_ENABLED_MASK;
- prop->max_power_default = MAX_POWER_DEFAULT;
+ prop->max_power_default = MAX_POWER_DEFAULT_PCI;
prop->cb_pool_cb_cnt = GAUDI_CB_POOL_CB_CNT;
prop->cb_pool_cb_size = GAUDI_CB_POOL_CB_SIZE;
@@ -6241,6 +6241,15 @@ static int gaudi_armcp_info_get(struct hl_device *hdev)
strncpy(prop->armcp_info.card_name, GAUDI_DEFAULT_CARD_NAME,
CARD_NAME_MAX_LEN);
+ hdev->card_type = le32_to_cpu(hdev->asic_prop.armcp_info.card_type);
+
+ if (hdev->card_type == armcp_card_type_pci)
+ prop->max_power_default = MAX_POWER_DEFAULT_PCI;
+ else if (hdev->card_type == armcp_card_type_pmc)
+ prop->max_power_default = MAX_POWER_DEFAULT_PMC;
+
+ hdev->max_power = prop->max_power_default;
+
return 0;
}
diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h
index 41a8d9bff6bf9..00f1efeaa8832 100644
--- a/drivers/misc/habanalabs/gaudi/gaudiP.h
+++ b/drivers/misc/habanalabs/gaudi/gaudiP.h
@@ -41,7 +41,8 @@
#define GAUDI_MAX_CLK_FREQ 2200000000ull /* 2200 MHz */
-#define MAX_POWER_DEFAULT 200000 /* 200W */
+#define MAX_POWER_DEFAULT_PCI 200000 /* 200W */
+#define MAX_POWER_DEFAULT_PMC 350000 /* 350W */
#define GAUDI_CPU_TIMEOUT_USEC 15000000 /* 15s */
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h
index feedf3194ea6c..1072f300252a4 100644
--- a/drivers/misc/habanalabs/habanalabs.h
+++ b/drivers/misc/habanalabs/habanalabs.h
@@ -1408,6 +1408,8 @@ struct hl_device_idle_busy_ts {
* details.
* @in_reset: is device in reset flow.
* @curr_pll_profile: current PLL profile.
+ * @card_type: Various ASICs have several card types. This indicates the card
+ * type of the current device.
* @cs_active_cnt: number of active command submissions on this device (active
* means already in H/W queues)
* @major: habanalabs kernel driver major.
@@ -1503,6 +1505,7 @@ struct hl_device {
u64 clock_gating_mask;
atomic_t in_reset;
enum hl_pll_frequency curr_pll_profile;
+ enum armcp_card_types card_type;
int cs_active_cnt;
u32 major;
u32 high_pll;
@@ -1792,7 +1795,7 @@ int hl_get_pwm_info(struct hl_device *hdev,
void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
long value);
u64 hl_get_max_power(struct hl_device *hdev);
-void hl_set_max_power(struct hl_device *hdev, u64 value);
+void hl_set_max_power(struct hl_device *hdev);
int hl_set_voltage(struct hl_device *hdev,
int sensor_index, u32 attr, long value);
int hl_set_current(struct hl_device *hdev,
diff --git a/drivers/misc/habanalabs/sysfs.c b/drivers/misc/habanalabs/sysfs.c
index 70b6b1863c2ef..87dadb53ac59d 100644
--- a/drivers/misc/habanalabs/sysfs.c
+++ b/drivers/misc/habanalabs/sysfs.c
@@ -81,7 +81,7 @@ u64 hl_get_max_power(struct hl_device *hdev)
return result;
}
-void hl_set_max_power(struct hl_device *hdev, u64 value)
+void hl_set_max_power(struct hl_device *hdev)
{
struct armcp_packet pkt;
int rc;
@@ -90,7 +90,7 @@ void hl_set_max_power(struct hl_device *hdev, u64 value)
pkt.ctl = cpu_to_le32(ARMCP_PACKET_MAX_POWER_SET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
- pkt.value = cpu_to_le64(value);
+ pkt.value = cpu_to_le64(hdev->max_power);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
0, NULL);
@@ -316,7 +316,7 @@ static ssize_t max_power_store(struct device *dev,
}
hdev->max_power = value;
- hl_set_max_power(hdev, value);
+ hl_set_max_power(hdev);
out:
return count;
@@ -419,6 +419,7 @@ int hl_sysfs_init(struct hl_device *hdev)
hdev->pm_mng_profile = PM_AUTO;
else
hdev->pm_mng_profile = PM_MANUAL;
+
hdev->max_power = hdev->asic_prop.max_power_default;
hdev->asic_funcs->add_device_attr(hdev, &hl_dev_clks_attr_group);
--
2.25.1
