From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
[ Upstream commit c7fabbc51352f50cc58242a6dc3b9c1a3599849b ]
Drop duplicated words in sound/pci/.
{and, the, at}
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@xxxxxxxxxxxxx
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
sound/pci/cs46xx/cs46xx_lib.c | 2 +-
sound/pci/cs46xx/dsp_spos_scb_lib.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/hda_generic.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/pci/oxygen/xonar_dg.c | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 528102cc2d5d0..d824ff4ae3e3b 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -780,7 +780,7 @@ static void snd_cs46xx_set_capture_sample_rate(struct snd_cs46xx *chip, unsigned
rate = 48000 / 9;
/*
- * We can not capture at at rate greater than the Input Rate (48000).
+ * We can not capture at a rate greater than the Input Rate (48000).
* Return an error if an attempt is made to stray outside that limit.
*/
if (rate > 48000)
diff --git a/sound/pci/cs46xx/dsp_spos_scb_lib.c b/sound/pci/cs46xx/dsp_spos_scb_lib.c
index 7488e1b7a7707..4e726d39b05d1 100644
--- a/sound/pci/cs46xx/dsp_spos_scb_lib.c
+++ b/sound/pci/cs46xx/dsp_spos_scb_lib.c
@@ -1742,7 +1742,7 @@ int cs46xx_iec958_pre_open (struct snd_cs46xx *chip)
struct dsp_spos_instance * ins = chip->dsp_spos_instance;
if ( ins->spdif_status_out & DSP_SPDIF_STATUS_OUTPUT_ENABLED ) {
- /* remove AsynchFGTxSCB and and PCMSerialInput_II */
+ /* remove AsynchFGTxSCB and PCMSerialInput_II */
cs46xx_dsp_disable_spdif_out (chip);
/* save state */
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index cbe0248225c1c..4e67614f15f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -3496,7 +3496,7 @@ EXPORT_SYMBOL_GPL(snd_hda_set_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 949c90a859fab..184089c5e8cbc 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -820,7 +820,7 @@ static void activate_amp_in(struct hda_codec *codec, struct nid_path *path,
}
}
-/* sync power of each widget in the the given path */
+/* sync power of each widget in the given path */
static hda_nid_t path_power_update(struct hda_codec *codec,
struct nid_path *path,
bool allow_powerdown)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index d1a6d20ace0da..80b72d0702c5e 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -862,7 +862,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index 3919aed39ca03..5e52086d7b986 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@xxxxxxx>
diff --git a/sound/pci/oxygen/xonar_dg.c b/sound/pci/oxygen/xonar_dg.c
index 4cf3200e988b0..df44135e1b0c9 100644
--- a/sound/pci/oxygen/xonar_dg.c
+++ b/sound/pci/oxygen/xonar_dg.c
@@ -39,7 +39,7 @@
* GPIO 4 <- headphone detect
* GPIO 5 -> enable ADC analog circuit for the left channel
* GPIO 6 -> enable ADC analog circuit for the right channel
- * GPIO 7 -> switch green rear output jack between CS4245 and and the first
+ * GPIO 7 -> switch green rear output jack between CS4245 and the first
* channel of CS4361 (mechanical relay)
* GPIO 8 -> enable output to speakers
*
--
2.25.1
