[PATCH AUTOSEL 5.8 18/42] habanalabs: set max power according to card type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Oded Gabbay <oded.gabbay@xxxxxxxxx>

[ Upstream commit 58361aae4b0eed388680a89ac153d27177f40510 ]

In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.

The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.

Signed-off-by: Oded Gabbay <oded.gabbay@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/misc/habanalabs/device.c       |  7 ++++++-
 drivers/misc/habanalabs/gaudi/gaudi.c  | 11 ++++++++++-
 drivers/misc/habanalabs/gaudi/gaudiP.h |  3 ++-
 drivers/misc/habanalabs/habanalabs.h   |  5 ++++-
 drivers/misc/habanalabs/sysfs.c        |  7 ++++---
 5 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index 59608d1bac880..baa4e66d4c457 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -1027,7 +1027,7 @@ int hl_device_reset(struct hl_device *hdev, bool hard_reset,
 			goto out_err;
 		}
 
-		hl_set_max_power(hdev, hdev->max_power);
+		hl_set_max_power(hdev);
 	} else {
 		rc = hdev->asic_funcs->soft_reset_late_init(hdev);
 		if (rc) {
@@ -1268,6 +1268,11 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
 		goto out_disabled;
 	}
 
+	/* Need to call this again because the max power might change,
+	 * depending on card type for certain ASICs
+	 */
+	hl_set_max_power(hdev);
+
 	/*
 	 * hl_hwmon_init() must be called after device_late_init(), because only
 	 * there we get the information from the device about which
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 8b6cf722ddf8e..ca183733847b6 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -447,7 +447,7 @@ static int gaudi_get_fixed_properties(struct hl_device *hdev)
 	prop->num_of_events = GAUDI_EVENT_SIZE;
 	prop->tpc_enabled_mask = TPC_ENABLED_MASK;
 
-	prop->max_power_default = MAX_POWER_DEFAULT;
+	prop->max_power_default = MAX_POWER_DEFAULT_PCI;
 
 	prop->cb_pool_cb_cnt = GAUDI_CB_POOL_CB_CNT;
 	prop->cb_pool_cb_size = GAUDI_CB_POOL_CB_SIZE;
@@ -6241,6 +6241,15 @@ static int gaudi_armcp_info_get(struct hl_device *hdev)
 		strncpy(prop->armcp_info.card_name, GAUDI_DEFAULT_CARD_NAME,
 				CARD_NAME_MAX_LEN);
 
+	hdev->card_type = le32_to_cpu(hdev->asic_prop.armcp_info.card_type);
+
+	if (hdev->card_type == armcp_card_type_pci)
+		prop->max_power_default = MAX_POWER_DEFAULT_PCI;
+	else if (hdev->card_type == armcp_card_type_pmc)
+		prop->max_power_default = MAX_POWER_DEFAULT_PMC;
+
+	hdev->max_power = prop->max_power_default;
+
 	return 0;
 }
 
diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h
index 41a8d9bff6bf9..00f1efeaa8832 100644
--- a/drivers/misc/habanalabs/gaudi/gaudiP.h
+++ b/drivers/misc/habanalabs/gaudi/gaudiP.h
@@ -41,7 +41,8 @@
 
 #define GAUDI_MAX_CLK_FREQ		2200000000ull	/* 2200 MHz */
 
-#define MAX_POWER_DEFAULT		200000		/* 200W */
+#define MAX_POWER_DEFAULT_PCI		200000		/* 200W */
+#define MAX_POWER_DEFAULT_PMC		350000		/* 350W */
 
 #define GAUDI_CPU_TIMEOUT_USEC		15000000	/* 15s */
 
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h
index feedf3194ea6c..1072f300252a4 100644
--- a/drivers/misc/habanalabs/habanalabs.h
+++ b/drivers/misc/habanalabs/habanalabs.h
@@ -1408,6 +1408,8 @@ struct hl_device_idle_busy_ts {
  *                     details.
  * @in_reset: is device in reset flow.
  * @curr_pll_profile: current PLL profile.
+ * @card_type: Various ASICs have several card types. This indicates the card
+ *             type of the current device.
  * @cs_active_cnt: number of active command submissions on this device (active
  *                 means already in H/W queues)
  * @major: habanalabs kernel driver major.
@@ -1503,6 +1505,7 @@ struct hl_device {
 	u64				clock_gating_mask;
 	atomic_t			in_reset;
 	enum hl_pll_frequency		curr_pll_profile;
+	enum armcp_card_types		card_type;
 	int				cs_active_cnt;
 	u32				major;
 	u32				high_pll;
@@ -1792,7 +1795,7 @@ int hl_get_pwm_info(struct hl_device *hdev,
 void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
 			long value);
 u64 hl_get_max_power(struct hl_device *hdev);
-void hl_set_max_power(struct hl_device *hdev, u64 value);
+void hl_set_max_power(struct hl_device *hdev);
 int hl_set_voltage(struct hl_device *hdev,
 			int sensor_index, u32 attr, long value);
 int hl_set_current(struct hl_device *hdev,
diff --git a/drivers/misc/habanalabs/sysfs.c b/drivers/misc/habanalabs/sysfs.c
index 70b6b1863c2ef..87dadb53ac59d 100644
--- a/drivers/misc/habanalabs/sysfs.c
+++ b/drivers/misc/habanalabs/sysfs.c
@@ -81,7 +81,7 @@ u64 hl_get_max_power(struct hl_device *hdev)
 	return result;
 }
 
-void hl_set_max_power(struct hl_device *hdev, u64 value)
+void hl_set_max_power(struct hl_device *hdev)
 {
 	struct armcp_packet pkt;
 	int rc;
@@ -90,7 +90,7 @@ void hl_set_max_power(struct hl_device *hdev, u64 value)
 
 	pkt.ctl = cpu_to_le32(ARMCP_PACKET_MAX_POWER_SET <<
 				ARMCP_PKT_CTL_OPCODE_SHIFT);
-	pkt.value = cpu_to_le64(value);
+	pkt.value = cpu_to_le64(hdev->max_power);
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
 						0, NULL);
@@ -316,7 +316,7 @@ static ssize_t max_power_store(struct device *dev,
 	}
 
 	hdev->max_power = value;
-	hl_set_max_power(hdev, value);
+	hl_set_max_power(hdev);
 
 out:
 	return count;
@@ -419,6 +419,7 @@ int hl_sysfs_init(struct hl_device *hdev)
 		hdev->pm_mng_profile = PM_AUTO;
 	else
 		hdev->pm_mng_profile = PM_MANUAL;
+
 	hdev->max_power = hdev->asic_prop.max_power_default;
 
 	hdev->asic_funcs->add_device_attr(hdev, &hl_dev_clks_attr_group);
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux