Re: [PATCH] dmaengine: dw-edma: Fix scatter-gather address calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13-08-20, 16:14, Gustavo Pimentel wrote:
> Fix the source and destination physical address calculation of a
> peripheral device on scatter-gather implementation.
> 
> This issue manifested during tests using a 64 bits architecture system.
> The abnormal behavior wasn't visible before due to all previous tests
> were done using 32 bits architecture system, that masked his effect.

Applied, thanks

> 
> Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
> 

Dont leave empty line here

> Cc: Joao Pinto <jpinto@xxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
> ---
>  drivers/dma/dw-edma/dw-edma-core.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> index ed430ad..b971505 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -405,7 +405,7 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
>  			if (xfer->cyclic) {
>  				burst->dar = xfer->xfer.cyclic.paddr;
>  			} else {
> -				burst->dar = sg_dma_address(sg);
> +				burst->dar = dst_addr;
>  				/* Unlike the typical assumption by other
>  				 * drivers/IPs the peripheral memory isn't
>  				 * a FIFO memory, in this case, it's a
> @@ -413,14 +413,13 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
>  				 * and destination addresses are increased
>  				 * by the same portion (data length)
>  				 */
> -				src_addr += sg_dma_len(sg);
>  			}
>  		} else {
>  			burst->dar = dst_addr;
>  			if (xfer->cyclic) {
>  				burst->sar = xfer->xfer.cyclic.paddr;
>  			} else {
> -				burst->sar = sg_dma_address(sg);
> +				burst->sar = src_addr;
>  				/* Unlike the typical assumption by other
>  				 * drivers/IPs the peripheral memory isn't
>  				 * a FIFO memory, in this case, it's a
> @@ -428,12 +427,14 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
>  				 * and destination addresses are increased
>  				 * by the same portion (data length)
>  				 */
> -				dst_addr += sg_dma_len(sg);
>  			}
>  		}
>  
> -		if (!xfer->cyclic)
> +		if (!xfer->cyclic) {
> +			src_addr += sg_dma_len(sg);
> +			dst_addr += sg_dma_len(sg);
>  			sg = sg_next(sg);
> +		}
>  	}
>  
>  	return vchan_tx_prep(&chan->vc, &desc->vd, xfer->flags);
> -- 
> 2.7.4

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux