[PATCH AUTOSEL 5.7 15/54] spi: stm32: always perform registers configuration prior to transfer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alain Volmat <alain.volmat@xxxxxx>

[ Upstream commit 60ccb3515fc61a0124c70aa37317f75b67560024 ]

SPI registers content may have been lost upon suspend/resume sequence.
So, always compute and apply the necessary configuration in
stm32_spi_transfer_one_setup routine.

Signed-off-by: Alain Volmat <alain.volmat@xxxxxx>
Link: https://lore.kernel.org/r/1597043558-29668-6-git-send-email-alain.volmat@xxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/spi/spi-stm32.c | 42 +++++++++++++++++------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 08492284369dd..3fe1edb23e36c 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1586,41 +1586,33 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 	unsigned long flags;
 	unsigned int comm_type;
 	int nb_words, ret = 0;
+	int mbr;
 
 	spin_lock_irqsave(&spi->lock, flags);
 
 	spi->cur_xferlen = transfer->len;
 
-	if (spi->cur_bpw != transfer->bits_per_word) {
-		spi->cur_bpw = transfer->bits_per_word;
-		spi->cfg->set_bpw(spi);
-	}
-
-	if (spi->cur_speed != transfer->speed_hz) {
-		int mbr;
-
-		/* Update spi->cur_speed with real clock speed */
-		mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
-					    spi->cfg->baud_rate_div_min,
-					    spi->cfg->baud_rate_div_max);
-		if (mbr < 0) {
-			ret = mbr;
-			goto out;
-		}
+	spi->cur_bpw = transfer->bits_per_word;
+	spi->cfg->set_bpw(spi);
 
-		transfer->speed_hz = spi->cur_speed;
-		stm32_spi_set_mbr(spi, mbr);
+	/* Update spi->cur_speed with real clock speed */
+	mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+				    spi->cfg->baud_rate_div_min,
+				    spi->cfg->baud_rate_div_max);
+	if (mbr < 0) {
+		ret = mbr;
+		goto out;
 	}
 
-	comm_type = stm32_spi_communication_type(spi_dev, transfer);
-	if (spi->cur_comm != comm_type) {
-		ret = spi->cfg->set_mode(spi, comm_type);
+	transfer->speed_hz = spi->cur_speed;
+	stm32_spi_set_mbr(spi, mbr);
 
-		if (ret < 0)
-			goto out;
+	comm_type = stm32_spi_communication_type(spi_dev, transfer);
+	ret = spi->cfg->set_mode(spi, comm_type);
+	if (ret < 0)
+		goto out;
 
-		spi->cur_comm = comm_type;
-	}
+	spi->cur_comm = comm_type;
 
 	if (spi->cfg->set_data_idleness)
 		spi->cfg->set_data_idleness(spi, transfer->len);
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux