Re: [PATCH V2 3/7] phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29-07-20, 21:00, Sivaprakash Murugesan wrote:
> There were some problem in ipq8074 Gen2 PCIe phy init sequence.
> 
> 1. Few register values were wrongly updated in the phy init sequence.
> 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter
>    register which is added in serdes table causing the wrong register
>    was getting updated.
> 3. Clocks and resets were not added in the phy init.
> 
> Fix these to make Gen2 PCIe port on ipq8074 devices to work.

Applied to fixes, thanks

> 
> Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074")
> 

no need of empty line here, have fixed it up while applying

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux