This is a note to let you know that I've just added the patch titled
serial: 8250_exar: Fix number of ports for Commtech PCIe cards
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From c6b9e95dde7b54e6a53c47241201ab5a4035c320 Mon Sep 17 00:00:00 2001
From: Valmer Huhn <valmer.huhn@xxxxxxxxxxxxxxxxx>
Date: Thu, 13 Aug 2020 12:52:55 -0400
Subject: serial: 8250_exar: Fix number of ports for Commtech PCIe cards
The following in 8250_exar.c line 589 is used to determine the number
of ports for each Exar board:
nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f;
If the number of ports a card has is not explicitly specified, it defaults
to the rightmost 4 bits of the PCI device ID. This is prone to error since
not all PCI device IDs contain a number which corresponds to the number of
ports that card provides.
This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and
COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021.
Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and
8 ports respectively.
To fix this, each Commtech Fastcom PCIe card is given a struct where the
number of ports is explicitly specified. This ensures 'board->num_ports'
is used instead of the default 'pcidev->device & 0x0f'.
Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Valmer Huhn <valmer.huhn@xxxxxxxxxxxxxxxxx>
Tested-by: Valmer Huhn <valmer.huhn@xxxxxxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200813165255.GC345440@xxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_exar.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 04b9af7ed941..2d0e7c7e408d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -744,6 +744,24 @@ static const struct exar8250_board pbn_exar_XR17V35x = {
.exit = pci_xr17v35x_exit,
};
+static const struct exar8250_board pbn_fastcom35x_2 = {
+ .num_ports = 2,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_4 = {
+ .num_ports = 4,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_8 = {
+ .num_ports = 8,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
static const struct exar8250_board pbn_exar_XR17V4358 = {
.num_ports = 12,
.setup = pci_xr17v35x_setup,
@@ -811,9 +829,9 @@ static const struct pci_device_id exar_pci_tbl[] = {
EXAR_DEVICE(EXAR, XR17V358, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, XR17V4358, pbn_exar_XR17V4358),
EXAR_DEVICE(EXAR, XR17V8358, pbn_exar_XR17V8358),
- EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_exar_XR17V35x),
+ EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_fastcom35x_2),
+ EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_fastcom35x_4),
+ EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_fastcom35x_8),
EXAR_DEVICE(COMMTECH, 4222PCI335, pbn_fastcom335_2),
EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
--
2.28.0
