From: Daniel T. Lee <danieltimlee@xxxxxxxxx>
[ Upstream commit af9bd3e3331b8af42b6606c75797d041ab39380c ]
Currently, BPF programs with kprobe/sys_connect does not work properly.
Commit 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64")
This commit modifies the bpf_load behavior of kprobe events in the x64
architecture. If the current kprobe event target starts with "sys_*",
add the prefix "__x64_" to the front of the event.
Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a
solution to most of the problems caused by the commit below.
commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct
pt_regs-based sys_*() to __x64_sys_*()")
However, there is a problem with the sys_connect kprobe event that does
not work properly. For __sys_connect event, parameters can be fetched
normally, but for __x64_sys_connect, parameters cannot be fetched.
ffffffff818d3520 <__x64_sys_connect>:
ffffffff818d3520: e8 fb df 32 00 callq 0xffffffff81c01520
<__fentry__>
ffffffff818d3525: 48 8b 57 60 movq 96(%rdi), %rdx
ffffffff818d3529: 48 8b 77 68 movq 104(%rdi), %rsi
ffffffff818d352d: 48 8b 7f 70 movq 112(%rdi), %rdi
ffffffff818d3531: e8 1a ff ff ff callq 0xffffffff818d3450
<__sys_connect>
ffffffff818d3536: 48 98 cltq
ffffffff818d3538: c3 retq
ffffffff818d3539: 0f 1f 80 00 00 00 00 nopl (%rax)
As the assembly code for __x64_sys_connect shows, parameters should be
fetched and set into rdi, rsi, rdx registers prior to calling
__sys_connect.
Because of this problem, this commit fixes the sys_connect event by
first getting the value of the rdi register and then the value of the
rdi, rsi, and rdx register through an offset based on that value.
Fixes: 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64")
Signed-off-by: Daniel T. Lee <danieltimlee@xxxxxxxxx>
Signed-off-by: Daniel Borkmann <daniel@xxxxxxxxxxxxx>
Acked-by: Andrii Nakryiko <andriin@xxxxxx>
Link: https://lore.kernel.org/bpf/20200707184855.30968-2-danieltimlee@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
samples/bpf/map_perf_test_kern.c | 9 ++++++---
samples/bpf/test_map_in_map_kern.c | 9 ++++++---
samples/bpf/test_probe_write_user_kern.c | 9 ++++++---
3 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/samples/bpf/map_perf_test_kern.c b/samples/bpf/map_perf_test_kern.c
index 12e91ae64d4d9..c9b31193ca128 100644
--- a/samples/bpf/map_perf_test_kern.c
+++ b/samples/bpf/map_perf_test_kern.c
@@ -11,6 +11,8 @@
#include <bpf/bpf_helpers.h>
#include "bpf_legacy.h"
#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include "trace_common.h"
#define MAX_ENTRIES 1000
#define MAX_NR_CPUS 1024
@@ -154,9 +156,10 @@ int stress_percpu_hmap_alloc(struct pt_regs *ctx)
return 0;
}
-SEC("kprobe/sys_connect")
+SEC("kprobe/" SYSCALL(sys_connect))
int stress_lru_hmap_alloc(struct pt_regs *ctx)
{
+ struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
char fmt[] = "Failed at stress_lru_hmap_alloc. ret:%dn";
union {
u16 dst6[8];
@@ -175,8 +178,8 @@ int stress_lru_hmap_alloc(struct pt_regs *ctx)
long val = 1;
u32 key = 0;
- in6 = (struct sockaddr_in6 *)PT_REGS_PARM2(ctx);
- addrlen = (int)PT_REGS_PARM3(ctx);
+ in6 = (struct sockaddr_in6 *)PT_REGS_PARM2_CORE(real_regs);
+ addrlen = (int)PT_REGS_PARM3_CORE(real_regs);
if (addrlen != sizeof(*in6))
return 0;
diff --git a/samples/bpf/test_map_in_map_kern.c b/samples/bpf/test_map_in_map_kern.c
index 6cee61e8ce9b6..36a203e690645 100644
--- a/samples/bpf/test_map_in_map_kern.c
+++ b/samples/bpf/test_map_in_map_kern.c
@@ -13,6 +13,8 @@
#include <bpf/bpf_helpers.h>
#include "bpf_legacy.h"
#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include "trace_common.h"
#define MAX_NR_PORTS 65536
@@ -102,9 +104,10 @@ static __always_inline int do_inline_hash_lookup(void *inner_map, u32 port)
return result ? *result : -ENOENT;
}
-SEC("kprobe/sys_connect")
+SEC("kprobe/" SYSCALL(sys_connect))
int trace_sys_connect(struct pt_regs *ctx)
{
+ struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
struct sockaddr_in6 *in6;
u16 test_case, port, dst6[8];
int addrlen, ret, inline_ret, ret_key = 0;
@@ -112,8 +115,8 @@ int trace_sys_connect(struct pt_regs *ctx)
void *outer_map, *inner_map;
bool inline_hash = false;
- in6 = (struct sockaddr_in6 *)PT_REGS_PARM2(ctx);
- addrlen = (int)PT_REGS_PARM3(ctx);
+ in6 = (struct sockaddr_in6 *)PT_REGS_PARM2_CORE(real_regs);
+ addrlen = (int)PT_REGS_PARM3_CORE(real_regs);
if (addrlen != sizeof(*in6))
return 0;
diff --git a/samples/bpf/test_probe_write_user_kern.c b/samples/bpf/test_probe_write_user_kern.c
index f033f36a13a38..fd651a65281eb 100644
--- a/samples/bpf/test_probe_write_user_kern.c
+++ b/samples/bpf/test_probe_write_user_kern.c
@@ -10,6 +10,8 @@
#include <linux/version.h>
#include <bpf/bpf_helpers.h>
#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include "trace_common.h"
struct bpf_map_def SEC("maps") dnat_map = {
.type = BPF_MAP_TYPE_HASH,
@@ -26,13 +28,14 @@ struct bpf_map_def SEC("maps") dnat_map = {
* This example sits on a syscall, and the syscall ABI is relatively stable
* of course, across platforms, and over time, the ABI may change.
*/
-SEC("kprobe/sys_connect")
+SEC("kprobe/" SYSCALL(sys_connect))
int bpf_prog1(struct pt_regs *ctx)
{
+ struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
+ void *sockaddr_arg = (void *)PT_REGS_PARM2_CORE(real_regs);
+ int sockaddr_len = (int)PT_REGS_PARM3_CORE(real_regs);
struct sockaddr_in new_addr, orig_addr = {};
struct sockaddr_in *mapped_addr;
- void *sockaddr_arg = (void *)PT_REGS_PARM2(ctx);
- int sockaddr_len = (int)PT_REGS_PARM3(ctx);
if (sockaddr_len > sizeof(orig_addr))
return 0;
--
2.25.1
