[PATCH 4.19 063/168] leds: lm355x: avoid enum conversion warning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arnd Bergmann <arnd@xxxxxxxx>

[ Upstream commit 985b1f596f9ed56f42b8c2280005f943e1434c06 ]

clang points out that doing arithmetic between diffent enums is usually
a mistake:

drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~

In this driver, it is intentional, so add a cast to hide the false-positive
warning. It appears to be the only instance of this warning at the moment.

Fixes: b98d13c72592 ("leds: Add new LED driver for lm355x chips")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Pavel Machek <pavel@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/leds/leds-lm355x.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index 6cb94f9a2f3f3..b9c60dd2b1327 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -168,18 +168,19 @@ static int lm355x_chip_init(struct lm355x_chip_data *chip)
 	/* input and output pins configuration */
 	switch (chip->type) {
 	case CHIP_LM3554:
-		reg_val = pdata->pin_tx2 | pdata->ntc_pin;
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin;
 		ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
 		if (ret < 0)
 			goto out;
-		reg_val = pdata->pass_mode;
+		reg_val = (u32)pdata->pass_mode;
 		ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
 		if (ret < 0)
 			goto out;
 		break;
 
 	case CHIP_LM3556:
-		reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin |
+		          (u32)pdata->pass_mode;
 		ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
 		if (ret < 0)
 			goto out;
-- 
2.25.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux