The usb_request->zero doesn't apply for isoc. Also, if we prepare a
0-length (ZLP) TRB for the OUT direction, we need to prepare an extra
TRB to pad up to the MPS alignment. Use the same bounce buffer for the
ZLP TRB and the extra pad TRB.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: d6e5a549cc4d ("usb: dwc3: simplify ZLP handling")
Fixes: 04c03d10e507 ("usb: dwc3: gadget: handle request->zero")
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
---
drivers/usb/dwc3/gadget.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 657616077502..c0175dff194e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1193,6 +1193,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
req->request.no_interrupt,
req->request.is_last);
} else if (req->request.zero && req->request.length &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
(IS_ALIGNED(req->request.length, maxp))) {
struct dwc3 *dwc = dep->dwc;
struct dwc3_trb *trb;
@@ -1202,14 +1203,25 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
/* prepare normal TRB */
dwc3_prepare_one_trb(dep, req, length, true, 0);
- /* Now prepare one extra TRB to handle ZLP */
+ /* Prepare one extra TRB to handle ZLP */
trb = &dep->trb_pool[dep->trb_enqueue];
req->num_trbs++;
__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
- false, 1, req->request.stream_id,
+ !req->direction, 1, req->request.stream_id,
req->request.short_not_ok,
req->request.no_interrupt,
req->request.is_last);
+
+ /* Prepare one more TRB to handle MPS alignment for OUT */
+ if (!req->direction) {
+ trb = &dep->trb_pool[dep->trb_enqueue];
+ req->num_trbs++;
+ __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
+ false, 1, req->request.stream_id,
+ req->request.short_not_ok,
+ req->request.no_interrupt,
+ req->request.is_last);
+ }
} else {
dwc3_prepare_one_trb(dep, req, length, false, 0);
}
@@ -2684,8 +2696,17 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
status);
if (req->needs_extra_trb) {
+ unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+
ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
status);
+
+ /* Reclaim MPS padding TRB for ZLP */
+ if (!req->direction && req->request.zero && req->request.length &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+ (IS_ALIGNED(req->request.length, maxp)))
+ ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status);
+
req->needs_extra_trb = false;
}
--
2.28.0
