From: Linus Walleij <linus.walleij@xxxxxxxxxx> commit aa7bf898d4bf921f61fab078040e8baec3f28126 upstream. Whenever a display update was sent, apart from updating the memory base address, we called mcde_display_send_one_frame() which also sent a command to the display requesting the TE IRQ and enabling the FIFO. When continuous updates are running this is wrong: we need to only send this to start the flow to the display on the very first update. This lead to the display pipeline locking up and crashing. Check if the flow is already running and in that case do not call mcde_display_send_one_frame(). This fixes crashes on the Samsung GT-S7710 (Skomer). Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Acked-by: Stephan Gerhold <stephan@xxxxxxxxxxx> Cc: Stephan Gerhold <stephan@xxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://patchwork.freedesktop.org/patch/msgid/20200718233323.3407670-1-linus.walleij@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/mcde/mcde_display.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) --- a/drivers/gpu/drm/mcde/mcde_display.c +++ b/drivers/gpu/drm/mcde/mcde_display.c @@ -1060,9 +1060,14 @@ static void mcde_display_update(struct d */ if (fb) { mcde_set_extsrc(mcde, drm_fb_cma_get_gem_addr(fb, pstate, 0)); - if (!mcde->video_mode) - /* Send a single frame using software sync */ - mcde_display_send_one_frame(mcde); + if (!mcde->video_mode) { + /* + * Send a single frame using software sync if the flow + * is not active yet. + */ + if (mcde->flow_active == 0) + mcde_display_send_one_frame(mcde); + } dev_info_once(mcde->dev, "sent first display update\n"); } else { /*
