Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS, not the PSC: there was a typo in the name of the define, which this commit fixes. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> --- This patch is needed for a followup commit that fixes using the mvneta driver as a module in RGMII configurations. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/marvell/mvneta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index f418f4f..d6b04d0 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -161,7 +161,7 @@ #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc #define MVNETA_GMAC0_PORT_ENABLE BIT(0) #define MVNETA_GMAC_CTRL_2 0x2c08 -#define MVNETA_GMAC2_PSC_ENABLE BIT(3) +#define MVNETA_GMAC2_PCS_ENABLE BIT(3) #define MVNETA_GMAC2_PORT_RGMII BIT(4) #define MVNETA_GMAC2_PORT_RESET BIT(6) #define MVNETA_GMAC_STATUS 0x2c10 @@ -733,7 +733,7 @@ static void mvneta_port_sgmii_config(struct mvneta_port *pp) u32 val; val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - val |= MVNETA_GMAC2_PSC_ENABLE; + val |= MVNETA_GMAC2_PCS_ENABLE; mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html