Patch "drm/i915: Don't enable display error interrupts from the start" has been added to the 3.13-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    drm/i915: Don't enable display error interrupts from the start

to the 3.13-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     drm-i915-don-t-enable-display-error-interrupts-from-the-start.patch
and it can be found in the queue-3.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 5c673b60a9b3b23486f4eda75c72e91d31d26a2b Mon Sep 17 00:00:00 2001
From: Daniel Vetter <daniel.vetter@xxxxxxxx>
Date: Fri, 7 Mar 2014 20:34:46 +0100
Subject: drm/i915: Don't enable display error interrupts from the start
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Daniel Vetter <daniel.vetter@xxxxxxxx>

commit 5c673b60a9b3b23486f4eda75c72e91d31d26a2b upstream.

We need to enable interrupt processing before all the modeset
state is set up. But that means we can fall over when we get a pipe
underrun. This shouldn't happen as long as the bios works correctly
but as usual this turns out to be wishful thinking.

So disable error interrupts at irq install time and rely on the
re-enabling code in the modeset functions to take care of this.

Note that due to the SDE interrupt handling race we must
uncondtionally enable all interrupt sources in SDEIER, hence no need
to enable the SERR bit specifically.

On gmch platforms we don't have an explicit enable/mask bit for fifo
underruns. Fixing this up would require a bit of software tracking,
hence is material for a separate patch. To make this possible we need
to switch all gmch platforms to the new pipestat interrupt handling
scheme Imre implemented for vlv, and then also add a safe form of sw
state checking to __cpu_fifo_underrun_reporting_enabled a bit.

v2: Also handle the ilk/snb cpu fifo underrun bits accordingly.
Spotted by Ville.

v3: Also handle the south interrupt underrun bits on ibx. Again
spotted by Ville.

Reported-by: Rob Clark <robdclark@xxxxxxxxx>
Cc: Rob Clark <robdclark@xxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Tested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/gpu/drm/i915/i915_irq.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2760,10 +2760,9 @@ static void ibx_irq_postinstall(struct d
 		return;
 
 	if (HAS_PCH_IBX(dev)) {
-		mask = SDE_GMBUS | SDE_AUX_MASK | SDE_TRANSB_FIFO_UNDER |
-		       SDE_TRANSA_FIFO_UNDER | SDE_POISON;
+		mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON;
 	} else {
-		mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT | SDE_ERROR_CPT;
+		mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
 
 		I915_WRITE(SERR_INT, I915_READ(SERR_INT));
 	}
@@ -2823,20 +2822,19 @@ static int ironlake_irq_postinstall(stru
 		display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB |
 				DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB |
 				DE_PLANEB_FLIP_DONE_IVB |
-				DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB |
-				DE_ERR_INT_IVB);
+				DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB);
 		extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB |
-			      DE_PIPEA_VBLANK_IVB);
+			      DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB);
 
 		I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
 	} else {
 		display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
 				DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
 				DE_AUX_CHANNEL_A |
-				DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN |
 				DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE |
 				DE_POISON);
-		extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT;
+		extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT |
+				DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN;
 	}
 
 	dev_priv->irq_mask = ~display_mask;
@@ -2952,9 +2950,9 @@ static void gen8_de_irq_postinstall(stru
 	struct drm_device *dev = dev_priv->dev;
 	uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE |
 		GEN8_PIPE_CDCLK_CRC_DONE |
-		GEN8_PIPE_FIFO_UNDERRUN |
 		GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
-	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK;
+	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
+		GEN8_PIPE_FIFO_UNDERRUN;
 	int pipe;
 	dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
 	dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;


Patches currently in stable-queue which might be from daniel.vetter@xxxxxxxx are

queue-3.13/drm-i915-don-t-enable-display-error-interrupts-from-the-start.patch
queue-3.13/drm-i915-disable-stolen-memory-when-dmar-is-active.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]