From: James Hilliard <james.hilliard1@xxxxxxxxx> commit 5c45d04c5081c1830d674f4d22d4400ea2083afe upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@xxxxxxxxx Cc: stable@xxxxxxxxxxxxxxx [ johan: amend VID define entry ] Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/cypress_m8.c | 2 ++ drivers/usb/serial/cypress_m8.h | 3 +++ 2 files changed, 5 insertions(+) --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -63,6 +63,7 @@ static const struct usb_device_id id_tab static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ @@ -77,6 +78,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -25,6 +25,9 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* Simply Automated HID->COM UPB PIM (using Cypress PID 0x5500) */ +#define VENDOR_ID_SAI 0x17dd + /* FRWD Dongle - a GPS sports watch */ #define VENDOR_ID_FRWD 0x6737 #define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
